Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 84 Results
INEOS Oligomers
-
MaterialEthanolaminesBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS GAS/SPEC MDEA (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > INEOS methyldiethanolamine (MDEA) based products offer the most affordable and effective method for removing hydrogen sulfide (H2S),carbon dioxide (CO2), and other contaminants from gas streams. GAS/SPEC specialty amines are proprietary formulations based on MDEA. GAS/SPEC specialty amines are formulated to meet your specific gas-treating needs and to provide a level of performance that other amines cannot match. -
MaterialGAS/SPEC Gas Treating AminesBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS GAS/SPEC CS-1 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC CS-1 specialty amine is a formulated MDEA (methyldiethanolamine) solvent designed for removal of H2S and CO2 from gas or liquid hydrocarbon streams. GAS/SPEC CS-1 is typically used in applications where low levels of CO2 are required in the treated gas. GAS/SPEC CS-1 provides greater gas removal capacity per volume of circulating solution than generic amines such as monoethanolamine (MEA) or diethanolamine (DEA). GAS/SPEC CS-1 is less corrosive than generic amines and can be used at up to 50 weight % amine strength, which reduces amine circulation rate and energy usage. This translates into lower operating costs and increased capacity for existing equipment and reduced capital for new equipment. Treament of natural gas, LPG, and ethane are typical applications. GAS/SPEC CS-1000 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC CS-1000 is a methyldiethanolamine (MDEA) based solvent formulated to provide deep removal of carbon dioxide (CO2) from gas processing applications. GAS/SPEC CS-1000 allows for greater CO2 removal capacity with superior chemical stability, lower corrosion and longer product life under extreme conditions than MEA (monoethanolamine) or DEA (diethanolamine). GAS/SPEC CS-1000 solvent should be considered mainly for applications in which the treated gas CO2 specification is less than 1000 ppmv. GAS/SPEC CS-1000 can be used to replace MDEA-piperazine blends in all applications. Typical ones include ammonia, hydrogen plants and ethane treating. GAS/SPEC CS-2000 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC CS-2000 Series Specialty Amines are a methyldiethanolamine (MDEA) based solvent formulated to provide deep removal of carbon dioxide (CO2) from gas streams. GAS/SPEC CS-2000 provides enhanced formulation stability over previous product alternatives in the market. By eliminating the preferential component loss that leads up to a buildup of impurities, it retains maximum CO2 removal capacity with lower energy requirements, lower corrosion, and longer product life even under extreme conditions. This translates into lower operating costs and less maintenance. GAS/SPEC CS-3 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC CS-3 Specialty Amine is specifically designed for near complete removal of H2S and moderate removal of CO2 from gas or liquid streams. This solvent is ideal for gas treating applications where some CO2 in the treated gas is desired. By allowing a portion of the CO2 to remain, GAS/SPEC CS-3 can increase the treating capacity or reduce the energy costs of the amine system with significantly less corrosion than diethanolamine (DEA) or monoethanolamine (MEA). GAS/SPEC CSPLUS (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC CS-Plus Specialty Amine is specifically designed for maximum CO2 removal. Since it’s introduction in 1988, GAS/SPEC has proven to be one of the most cost effective solvent for CO2 removal in ammonia, hydrogen, and other gas processing plants. This solvent has allowed gas processors to increase gas throughput or reduce energy costs in existing facilities. GAS/SPEC SS (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC SS Specialty Amine is an INEOS formulated MDEA (methyldiethanolamine) specifically designed for the gas treating industry. It selectively removes H2S over CO2 from a gas or liquid stream, which results in greater acid gas removal capacity per volume of circulating solution than amines such as monoethanolamine (MEA), diethanolamine (DEA), and diisopropanolamine (DIPA). GAS/SPEC SS is less corrosive and less prone to degradation than MEA, DEA, or DIPA and it can be used at up to 50 weight % amine strength, which reduces amine circulation rate and energy usage. This translates into lower operating costs and increased capacity for existing equipment and reduced capital for new equipment. Applications include coal gasification and tail gas treating. GAS/SPEC SS-3 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC SS-3 Specialty Amine is formulated for use in applications where selective removal of H2S from gas streams is required. GAS/SPEC SS-3 not only removes H2S to lower levels than MDEA (methyldiethanolamine) alone, but also improves CO2 slip. Increased selectivity for H2S over CO2 allows the plant to increase treating capacity, lower energy usage, and improve the quality of acid gas going to the sulfur plant. GAS/SPEC TG-10 (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) CONTACT > GAS/SPEC TG-10 Specialty Amine is specifically designed for meeting a 10 ppmv H2S specification in tail gas treating applications. GAS/SPEC TG-10 is ideal for meeting stringent regulatory requirements and reducing the final SO2 effluent associated with tail gas treaters. GAS/SPEC TG-10 can allow you to realize near 99.9% sulfur conversion. This product can help meet the lower specifications without the penalty of increased CO2 pickup so there is no reduction in sulfur plant capacity. -
MaterialHydrogenated Polybutene (PIB)BrandPanalane®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Panalane L-14E (N/A) 370 32 cSt @ 38°C TDS SSS SDS CONTACT > Cosmetic ingredient; personal care Panalane H-300E (N/A) 1300 662 cSt @ 99°C TDS SSS SDS CONTACT > Cosmetic ingredient; personal care -
MaterialHydrogenated PolydeceneBrandSilkflo®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Silkflo 362 (N/A) 287 1.7 cSt @ 100°C TDS (N/A) SDS CONTACT > Silkflo 362 is a 2 cSt (mm2/S) hydrogenated Didecene base fluid for cosmetic applications. Silkflo 364 (N/A) 438 3.9 cSt @ 100°C TDS (N/A) SDS CONTACT > Silkflo 364 is a 4 cSt (mm2/S) hydrogenated Polydecene base fluid for cosmetic applications. Silkflo 366 (N/A) 531 5.9 cSt @ 100°C TDS (N/A) SDS CONTACT > Silkflo 366 is a 6 cSt (mm2/S) hydrogenated Polydecene base fluid for cosmetic applications. -
MaterialLinear Alpha Olefin (LAO)BrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Alpha Olefin C6 C6 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Hexene enters into all reactions typical of alpha olefins. It can be used as a comonomer in polyolefins and as an intermediate in the production of oxo alcohols, hexyl mercaptans, organic aluminum compounds and synthetic fatty acids. Alpha Olefin C8 C8 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Octene enters into all reactions typical of alpha olefins. It can be used as a comonomer in polyolefins and as an intermediate in the production of oxo alcohols, octyl mercaptans, amines, organic aluminum compounds, synthetic fatty acids and hydrogenated oligomers. Alpha Olefin C10 C10 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Decene enters into all reactions typical of alpha olefins. It can be used as a comonomer in certain copolymers and as an intermediate in the production of epoxides, amines, oxo alcohols, synthetic lubricants, synthetic fatty acids and alkylated aromatics. Alpha Olefin C12 C12 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Dodecene enters into all reactions typical of alpha olefins. It can be used in the production of amines and amine oxides, mercaptans, oxo alcohols, alkylated aromatics, synthetic lubricants, epoxides and synthetic fatty acids. Alpha Olefin C1214 C12-C14 (N/A) (N/A) TDS SSS SDS CONTACT > Alpha olefin blends undergo all reactions typical of alpha olefins. They can be used in the production of amines and amine oxides, oxo alcohols, alkylated aromatics, epoxides, tanning oils, synthetic lubricants, lubricant additives, alpha olefin sulfonates and synthetic fatty acids. Alpha Olefin C14 C14 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Tetradecene enters into all reactions typical of alpha olefins. It can be used in the production of amines and amine oxides, mercaptans, oxo alcohols, alkylated aromatics, alpha olefin sulfonates, synthetic lubricants, epoxides, tanning oils and synthetic fatty acids. Alpha Olefin C1416 C14-C16 (N/A) (N/A) TDS SSS SDS CONTACT > Alpha olefin blends undergo all reactions typical of alpha olefins. They can be used in the production of amines and amine oxides, oxo alcohols, alkylated aromatics, epoxides, tanning oils, synthetic lubricants, lubricant additives, alpha olefin sulfonates and synthetic fatty acids. Alpha Olefin C16 C16 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Hexadecene enters into all reactions typical of alpha olefins. It can be used in the production of amines and amine oxides, mercaptans, oxo alcohols, alkylated aromatics, alpha olefin sulfonates, synthetic lubricants, epoxides, tanning oils and synthetic fatty acids. Alpha Olefin C1618 C16-C18 (N/A) (N/A) TDS SSS SDS CONTACT > Alpha Olefin C1618 undergoes all reactions typical of alpha olefins. Alpha Olefin C1618 can be used in the production of oxo alcohols, alkylated aromatics, epoxides, tanning oils, synthetic fatty acids, and alpha olefin sulfonates. C1618 is also used as a base fluid for synthetic drilling muds. Alpha Olefin C1618 Isomerized Olefin C16-C18 (N/A) (N/A) TDS SSS SDS CONTACT > Alpha Olefin C1618 Isomerized Olefin undergoes all reactions of typical of olefins. C1618 Isomerized Olefin can be used in the production of lubricant additives, epoxides, anhydrides, synthetic fatty acids, and alkylated aromatics. It is also used as a base fluid for synthetic drilling muds. Alpha Olefin C18 C18 (N/A) (N/A) TDS SSS SDS CONTACT > 1-Octadecene enters into all reactions typical of alpha olefins. It can be used in the production of amines and amine oxides, mercaptans, oxo alcohols, alkylated aromatics, alpha olefin sulfonates, synthetic lubricants, epoxides, tanning oils and synthetic fatty acids. Alpha Olefin C18 Isomerized Olefin C18 (N/A) (N/A) TDS SSS SDS CONTACT > Alpha Olefin C18 Isomerized Olefin undergoes all reactions of typical of olefins. C18 Isomerized Olefin can be used in the production of lubricant additives, epoxides, anhydrides, synthetic fatty acids, and alkylated aromatics. Alpha Olefin C2024 C20-C24 (N/A) (N/A) TDS SSS SDS CONTACT > Alpha olefin blends undergo all reactions typical of alpha olefins. They can be used in the production of amines and amine oxides, oxo alcohols, alkylated aromatics, epoxides, tanning oils, synthetic lubricants, lubricant additives, alpha olefin sulfonates and synthetic fatty acids. Alpha Olefin C20+ C20+ (N/A) (N/A) TDS SSS SDS CONTACT > Alpha olefin blends undergo all reactions typical of alpha olefins. They can be used in the production of amines and amine oxides, oxo alcohols, alkylated aromatics, epoxides, tanning oils, synthetic lubricants, lubricant additives, alpha olefin sulfonates and synthetic fatty acids. -
MaterialLinear Alpha Olefin (LAO)/Internal Olefin (IO)BrandAmodrill®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Amodrill 1000 (N/A) (N/A) 3.01 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Gulf of Mexico (GOM) Compliant drilling fluid for offshore drilling, the standard for US waters Amodrill 1100 (N/A) (N/A) 2.09 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Oilfield drilling fluids, favored in European waters or zero discharge operations Amodrill 1200 (N/A) (N/A) 2.25 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Oilfield drilling fluids, used in offshore applications Amodrill 1230 (N/A) (N/A) 2.14 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Oilfield drilling fluids, used in offshore applications Amodrill 1410 (N/A) (N/A) 1.87 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Lower viscosity drilling fluids; ideal for land farming of cuttings Amodrill 1500 (N/A) (N/A) 1.46 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Lower pour point and viscosity fluid ideal for offshore and land drilling Amodrill 2110 (N/A) (N/A) 5.5 cSt @ 40 ºC TDS (N/A) SDS CONTACT > Additive used to improve lubricity and wellbore stability. A PAO type material -
MaterialPolyalphaolefin (PAO) - High ViscosityBrandDurasyn®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Durasyn 174I (N/A) 1720 50 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 174I polyalphaolefin is a 50 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 176 (N/A) 2100 65 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 176 polyalphaolefin is a 65 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 180R (N/A) 2300 100 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 180R polyalphaolefin is a 100 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 180I (N/A) 2700 135 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 180I polyalphaolefin is a 135 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 185 (N/A) 3000 150 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 185 polyalphaolefin is a 150 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. -
MaterialPolyalphaolefin (PAO) - Low ViscosityBrandDurasyn®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Durasyn 133 (N/A) 390 3.4 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 133 polyalphaolefin is a 3.4 cSt (mm2/s) fully synthesized hydrogenated hydrocarbon base fluid. Durasyn 136 (N/A) 414 3.5 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 136 polyalphaolefin is a 3.5 cSt (mm2/s) fully synthesized hydrogenated hydrocarbon base fluid. Durasyn 145 (N/A) 510 5.1 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 145 polyalphaolefin is a 5 cSt (mm2/s) fully synthesized hydrogenated hydrocarbon base fluid. Durasyn 146 (N/A) 540 5.9 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 146 polyalphaolefin is a 6 cSt (mm2/s) fully synthesized hydrogenated hydrocarbon base fluid. Durasyn 147 (N/A) 620 7.0 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 147 polyalphaolefin is a 7 cSt (mm2/s) fully synthesized hydrogenated hydrocarbon base fluid. Durasyn 148 (N/A) 640 7.7 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 148 polyalphaolefin is an 8 cSt (mm2/s) fully synthesized hydrogenated hydrocarbon base fluid. Durasyn 156 (N/A) 537 6.0 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 156 polyalphaolefin is a 6 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid Durasyn 162 (N/A) 287 1.7 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 162 polyalphaolefin is a 2 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 164 (N/A) 438 4.0 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 164 polyalphaolefin is a 4 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 166 (N/A) 531 5.8 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 166 polyalphaolefin is a 6 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 168 (N/A) 609 7.9 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 168 polyalphaolefin is an 8 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. Durasyn 170 (N/A) 663 9.8 cSt @ 100°C TDS (N/A) SDS CONTACT > Durasyn 170 polyalphaolefin is a 10 cSt (mm2/s) hydrogenated synthetic hydrocarbon base fluid. -
MaterialPolybutene (PIB)BrandIndopol®BusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Indopol L-2 (N/A) 180 3.4 cSt @ 20ºC TDS SSS SDS CONTACT > Solvent; mould release; 2 stroke oil; emulsions Indopol L-3 (N/A) 220 4.4 cSt @ 20ºC TDS SSS SDS CONTACT > Solvent; mould release; 2 stroke oil; emulsions Indopol L-6 (N/A) 280 6.5 cSt @ 40ºC TDS SSS SDS CONTACT > Mould release; 2 stroke oil; metalworking; emulsions Indopol L-8 (N/A) 320 15 cSt @ 40ºC TDS SSS SDS CONTACT > Mould release; 2 stroke oil; metalworking; grease; emulsions Indopol L-14 (N/A) 370 27 cSt @ 40ºC TDS SSS SDS CONTACT > Rubber; asphalt/bitumen; agricultural; metalworking; 2 stroke oil; defoamer; grease; cosmetics; polymer modification; emulsions Indopol H-7 (N/A) 440 12 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; asphalt/bitumen; cables; agricultural; metalworking; compressor oil; 2 stroke oil; sealants; defoamer; polymer modification; emulsions Indopol H-8 (N/A) 490 15 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; asphalt/bitumen; cables; agricultural; metalworking; compressor oil; 2 stroke oil; sealants; defoamer; polymer modification; emulsions Indopol H-15 (N/A) 570 30 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; cables; agricultural; sealants; polymer modification; emulsions Indopol H-25 (N/A) 635 52 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; cables; agricultural; putties; grease; compressor oil; adhesives; sealants; polymer modification; emulsions Indopol H-50 (N/A) 800 108 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; cables; agricultural; putties; oil thickener; 2 stroke oil; gear & hydraulic oil; adhesives; sealants; polymer modification; emulsions Indopol H-100 (N/A) 910 218 cSt @ 100ºC TDS SSS SDS CONTACT > Fuel & Lube additives; Rubber; asphalt/bitumen; cables; agricultural; oil thickener; 2 stroke oil; gear & hydraulic oil; compressor oil; metalworking; grease; adhesives; sealants; cosmetics; polymer modification; emulsions Indopol H-300 (N/A) 1300 630 cSt @ 100ºC TDS SSS SDS CONTACT > Fuel & Lube additives; Rubber; asphalt/bitumen; cables; agricultural; oil thickener; 2 stroke oil; gear & hydraulic oil; compressor oil; metalworking; grease; adhesives; sealants; cling film; cosmetics; personal care; polymer modification; emulsions Indopol H-1200 (N/A) 2100 2500 cSt @ 100ºC TDS SSS SDS CONTACT > Fuel & Lube additives; Rubber; asphalt/bitumen; cables; agricultural; oil thickener; gear & hydraulic oil; compressor oil; metalworking; grease; adhesives; sealants; cling film; emulsions Indopol H-1500 (N/A) 2200 3050 cSt @ 100ºC TDS SSS SDS CONTACT > Fuel & Lube additives; rubber; asphalt/bitumen; cables; agricultural; oil thickener; gear & hydraulic oil; compressor oil; metalworking; grease; adhesives; sealants; cling film; emulsions Indopol H-1900 (N/A) 2500 4050 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; asphalt/bitumen; agricultural; oil thickener; gear & hydraulic oil; compressor oil; metalworking; grease; adhesives; sealants; personal care; emulsions, medical Indopol H-2100 (N/A) 2500 4250 cSt @ 100ºC TDS SSS SDS CONTACT > Rubber; asphalt/bitumen; agricultural; oil thickener; gear & hydraulic oil; compressor oil; metalworking; grease; adhesives; sealants; personal care; emulsions Indopol H-6000 (N/A) 4200 12200 cSt @100ºC TDS SSS SDS CONTACT > Asphalt/bitumen; agricultural; oil thickener; gear & hydraulic oil; metalworking; grease; sealants; damping fluids; emulsions Indopol H-18000 (N/A) 6000 40500 cSt @ 100ºC TDS SSS SDS CONTACT > Asphalt/bitumen; agricultural; oil thickener; gear & hydraulic oil; metalworking; grease; sealants; damping fluids; emulsions -
MaterialSpecialty OligomersBrandBusinessINEOS OligomersGrades
PRODUCT
GRADECARBON
CHAINMOL.
WEIGHT
(Mn)KINEMATIC
VISCOSITYTECH
DATA
SHEETSALES SPECS SDS CONTACT APPLICATIONS Cyclopentane C5 70 (N/A) TDS SSS SDS CONTACT > Foam blowing agent; reaction medium solvent; aerosol propellant; extraction solvent Cyclopentane 70 C5 (N/A) (N/A) TDS SSS SDS CONTACT > Foam blowing agent; reaction medium solvent; aerosol propellant; extraction solvent Cyclopentane 85 C5 (N/A) (N/A) TDS SSS SDS CONTACT > Foam blowing agent; reaction medium solvent; aerosol propellant; extraction solvent Diisobutylene C8 (N/A) (N/A) TDS SSS SDS CONTACT > Octylphenol resins used as tackifiers in radial tires, Octylated diphenylamine stabilizers for lubricants and rubbers, Isononyl derivatives used to produce polymerization initiators and compressor fluids, Sulfur additives for anti-wear lubricants and HALS stabilizers for outdoor polyolefin applications, co-monomer in the production of elastomers and hydrocarbon resins, chain stopper for polycarbonate resins Diisobutylene HP C8 (N/A) (N/A) TDS SSS SDS CONTACT > Octylphenol resins used as tackifiers in radial tires, Octylated diphenylamine stabilizers for lubricants and rubbers, Isononyl derivatives used to produce polymerization initiators and compressor fluids, Sulfur additives for anti-wear lubricants and HALS stabilizers for outdoor polyolefin applications, co-monomer in the production of elastomers and hydrocarbon resins, chain stopper for polycarbonate resins Diisobutylene 99 C8 (N/A) (N/A) TDS SSS SDS CONTACT > Octylphenol resins used as tackifiers in radial tires, Octylated diphenylamine stabilizers for lubricants and rubbers, Isononyl derivatives used to produce polymerization initiators and compressor fluids, Sulfur additives for anti-wear lubricants and HALS stabilizers for outdoor polyolefin applications, co-monomer in the production of elastomers and hydrocarbon resins, chain stopper for polycarbonate resins Isoamylene C5 70 (N/A) TDS SSS SDS CONTACT > Used in the synthesis of fragrances, pesticides, herbicides, pharmaceuticals, catalysts, peroxides, phenolic resins, hot melt adhesives, stabilizers and photo-developers Isododecane C12 (N/A) 1.25 cSt @ 40C TDS SSS SDS CONTACT > Particularly suitable for all applications in which stringent demands are made regarding purity and chemical stability. An important use of Isododecane is in the polymerization processes (e.g. low density polyethylene, polypropylene, PVC, styrenics and synthetic rubbers), where it is used as either a solvent or as a dispersing agent for high reactivity organic peroxide catalysts. Its low odour, very low toxicity, and easily detectable solvent residues are important properties for film applications. Other uses are for cosmetics, insecticide solutions and solvents. Isoeicosane C20 (N/A) 6.75 cSt @ 40C TDS SSS SDS CONTACT > Emollient in the personal care industry during the manufacture of make-up, eye shadow, baby wipes, skin lotions, hair care, and dental moulding materials (silicone extender). Isohexadecane C16 (N/A) 4.28 cSt @ 40C TDS SSS SDS CONTACT > High quality cosmetic and personal care products: Foundation creams, suncare or skincare creams, lip balms, deodorants, antiperspirant sticks, makeup removers and hair conditioners. Isohexadecane can also be used as heat transfer fluid when higher temperatures and lower pressures are required. Isooctane 100 C8 (N/A) 0.72 cSt @ 20C TDS SSS SDS CONTACT > Reference fuel; inert reaction medium for organic synthesis; solvent for the extraction of branched paraffins and for the crystallisation of fine chemicals. Also used as solvent for pyrophoric reagents like n-Butyllithium or Methylaluminoxane. Methoxypentane C6 102 (N/A) TDS SSS SDS CONTACT > Reaction medium and extraction solvent in advanced chemical processing in the manufacture of specilaty chemicals, fine chemicals, and life science intermediates Methylpropadiene C4 54 (N/A) TDS SSS SDS CONTACT > Co-monomer in 1,3-butadiene based rubber and elastomers production, intermediate in the synthesis of flavor and fragrance products Triisobutylene C12 (N/A) (N/A) TDS SSS SDS CONTACT > Chemical intermediate in the production of tert-Dodecylmercaptan – a chain transfer agent used in the polymerisation of styrenics - and tridecyl alcohol/acid (plasticisers and solvent components). Triisobutylene can also be functionalized for the production of lube additives.