INEOS Technologies

MATERIALPRODUCTSUB MATERIALTECH
DATA
SHEET
SDSAPPLICATIONSCONTACT
PVC AdditivesEvicas 90Build-up Suppressant, Antifouling agent, Coating agentsOur world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: Extended Reactor Operation (on some reactors for 2000+ batches without cleaning), Increased production capacity (due to decreased time for cleaning), maximum reactor heat transfer as build-up is minimised, safety and environmental improvements as reduced necessity for opening the reactor decreases the potential for a VCM release and minimises employee exposure to VCM, and by reducing lumps and polymer build up, consistent high quality PVC is produced. pctorders@ineos.com
PVC AdditivesEvicas 90CSConcentrated Build-up Suppressant, Antifouling agent, Coating agentsOur world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. No adverse effect on PVC properties when applied evenly and without excess. Could be used for emulsion and copolymer as well as for suspension PVC or other free radical processes. Fully compatible with EVICAS 90, EVICAS 90H and EVICAS CN4. Aids to prevent PVC build-up in troublesome areas eg agitator blades, agitator shaft, internal baffles and condenser tubes. Just a few kg (or less) of EVICAS 90CS needs to be applied during the manual clean. Allows prolonged operation of a reactor, usually for a closed process, before manual cleaning of the reactor is required. Reduces reactor downtime and allows increased PVC productivity per annum. Maximises reactor heat transfer by minimizing the build up of polymer. Can aid fish eye reduction and lowers foreign matter.pctorders@ineos.com
PVC AdditivesEvicas 90HBuild-up Suppressant, Antifouling agent, Coating agentsOur world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: Extended Reactor Operation (on some reactors for 2000+ batches without cleaning), Increased production capacity (due to decreased time for cleaning), maximum reactor heat transfer as build-up is minimised, safety and environmental improvements as reduced necessity for opening the reactor decreases the potential for a VCM release and minimises employee exposure to VCM, and by reducing lumps and polymer build up, consistent high quality PVC is produced. pctorders@ineos.com
PVC AdditivesEvicas CN4Build-up Suppressant, Antifouling agent, Coating agentsOur world famous EVICAS range of products are used to prevent polymer build-up in reactors and condensers of all the different PVC homopolymer, copolymers and paste/ emulsion manufacturing processes. Main advantages: Improved antifouling performance leading to extended reactor operation: the build-up becomes easier to remove because it is more friable. The reduced necessity for opening the reactor also decreases the potential for a VCM release and minimises employee exposure to VCM. As with EVICAS 90 and 90H, EVICAS CN4 is applicable to all types of reactors and reflux condensers. The EVICAS range products maximises reactor’s heat transfer by minimising the build-up of polymer. Product Quality: with EVICAS CN4, an improvement of up to 20% in the colour of the PVC powder has been observed. EVICAS CN4 reduces the possibilities of dark specs in case of non-optimum antifouling application system (e.g. when too much antifouling agent is added or when the product is applied in a highly non-uniform layer). pctorders@ineos.com
PVC AdditivesINOVOL AF12Antifoam, De-foamerAntifoam or De-foamer - used to reduce foaming that may occur during the de-gassing of slurry inside the reactor, during high-pressure discharge of slurry from a reactor or during the high temperature stripping of PVC slurry or during additive make-up. Minimises carry-over of PVC during stripping or de-gassing. No adverse effect on polymer properties and perfectly suited to suspension PVC. pctorders@ineos.com
PVC AdditivesINOVOL AS30Anti-swelling agent, Reflux Condenser AntifoamReflux condenser antifoam - used to reduce foaming or swelling that may occur during the PVC reaction in reactors using reflux condensers. Helps to allow an increased monomer charging ratio. Helps to avoid carry-over from the reactor condenser and fouling in the condenser. pctorders@ineos.com
PVC AdditivesINOVOL FPSecondary Suspending Agent, Porosity enhancerInovol FP is used in the suspension polymerisation of PVC, mainly to determine morphological parameters such as porosity. Main advantages: Very tight PVC particle size distribution, Improved PVC powder flow, Improved internal morphology of the PVC resin leading to faster VCM desorption kinetics and significantly lower residual VCM content in the polymer. Quick absorption of processing additives. Very efficient to achieve high porosities even at high temperature. Less foaming both in-reactor (with good advantages for condenser operation) and during stripping. Highly efficient secondary – reduced consumption for same porosity target. Improved melt color of the polymer. Strong reduction/ elimination fisheyes/ dispersion problems. Good hot water charge granulation stability. pctorders@ineos.com
PVC AdditivesINOVOL MS8Inhibitor, Recovered Monomer StabiliserRecovered monomer stabiliser - used to inhibit polymerisation in the VC recovery system, preventing build-up in the system and inhibiting the formation of unwanted vinyl chloride polyperoxides. It can be used in recovery plants of emulsion, copolymer, mass and suspension PVC. pctorders@ineos.com
PVC AdditivesINOVOL PA4Primary Suspending Agent, Dispersing agents, granulating agentsDispersing agents, granulating agents - used in the suspension polymerisation of PVC, to determine mainly particle size and size distribution and to ensure suspension stability. Main advantages: Stable and robust recipes across entire grade range. Condenser compatible even at high reflux rate. Compatible with other primaries and secondary suspending agents. Our operating experience with this product is on a range of technologies, reactor types and recipes. pctorders@ineos.com
PVC AdditivesINOVOL PA6Primary Suspending Agent, Dispersing agents, granulating agentsDispersing agents, granulating agents - used in the suspension polymerisation of PVC, to determine mainly particle size and size distribution and to ensure suspension stability. A primary suspending agent developed to optimize size control during PVC polymerisation also when subjected to very demanding high productivity conditions: High Monomer / water ratios, High condenser heat removal and Direct steam injection heat up. The product works well in combination with Inovol SA5 in low K value PVC grades.pctorders@ineos.com
PVC AdditivesINOVOL PA6-74Primary Suspending Agent, Dispersing agents, granulating agentsDispersing agents, granulating agents - used in the suspension polymerisation of PVC, to determine mainly particle size and size distribution and to ensure suspension stability. A primary suspending agent developed to optimize size control during PVC polymerisation also when subjected to very demanding high productivity conditions: High Monomer / water ratios, High condenser heat removal and Direct steam injection heat up. The product works well in combination with Inovol SA5 in low K value PVC grades.pctorders@ineos.com
PVC AdditivesINOVOL PA7Primary Suspending Agent, Dispersing agents, granulating agentsDispersing agents, granulating agents - used in the suspension polymerisation of PVC, to determine mainly particle size and size distribution and to ensure suspension stability. Main advantages: Gives additional colloid stability to the recipe. Suitable for high bulk-density polymers. In combination with Inovol SA5 it improves the size distribution spread. Minimises coarse and fine fraction. Improves the Long Term Heat Stability in Ba/Zn or Ca/Zn formulations. pctorders@ineos.com
PVC AdditivesINOVOL PA8Suspending Agent, Dispersing agents, granulating agentsDispersing agents, granulating agents to ensure suspension stability.pctorders@ineos.com
PVC AdditivesINOVOL SA4Secondary Suspending Agent, Porosity enhancerInovol SA4 could be used in the suspension polymerisation of PVC, mainly to determine morphological parameters such as porosity. Main advantages: High bulk density versus other secondaries on rigid grades, Low coarse and fine fractions, Low foam - suitable for condenser, Very high consistency .pctorders@ineos.com
PVC AdditivesINOVOL SA4/bSecondary Suspending Agent, Porosity enhancerInovol SA4/b could be used in the suspension polymerisation of PVC, mainly to determine morphological parameters such as porosity. Main advantages: High bulk density versus other secondaries on rigid grades, Low coarse and fine fractions, Low foam - suitable for condenser, Very high consistency. pctorders@ineos.com
PVC AdditivesINOVOL SA5Secondary Suspending Agent, Porosity enhancerInovol SA5 is used in the suspension polymerisation of PVC, mainly to determine morphological parameters such as porosity. Main advantages: Very good internal homogeneity of the PVC, Very good strippability of the resin for high-temperature polymerisations resulting in low residual VCM, Low coarse and fine fractions, Suitable also for copolymers. The product has a high cloud point. Inovol SA5 performs excellently in the production of VA/VC (vinyl acetate - vinyl chloride) copolymers. pctorders@ineos.com