Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 255 Results
INEOS O & P Europe
-
MaterialCompoundBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HEY500-NP 25
(230°C/2.16 kg)910 TDS SSS QUICK SDS > REACH > CONTACT > LDPE compound for extrusion and co-extrusion coating applications in which high speeds with various substrates are involved. -
MaterialHEAT SEALBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS KS350 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with slip and anti-blocking. KS350 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KS350 HP offers a very low heat sealing temperature and contains anti-block and slip additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines. KS351 7.3
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with slip and anti-blocking. KS357 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer for metallisable film. KS357 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KS357 HP offers a very low heat sealing temperature and contains no technical additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines. KS359 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer without technical additives. KS359 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KS359 HP offers a very low heat sealing temperature and contains no technical additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines. KS383 HP 6
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with anti-blocking, recommended for high speed BOPP lines. KS384 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with anti-blocking. KS385 5
(230°C/2.16 kg)620 TDS QUICK SDS > REACH > CONTACT > BOPP Film 105°C SIT terpolymer with anti-blocking. KS399 5
(230°C/2.16 kg)500 TDS QUICK SDS > REACH > CONTACT > BOPP Film 90°C SIT butene copolymer without technical additives. KS400 5
(230°C/2.16 kg)700 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer with slip and anti-blocking. KS407 5
(230°C/2.16 kg)700 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer for metallisable film. KS407HP 5
(230°C/2.16 kg)720 TDS QUICK SDS > REACH > CONTACT > Modified random copolymer with a high ethylene content, developed for use primarily as the sealing layer in "coextruded bioriented metallisable film". KS409 5
(230°C/2.16 kg)700 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer without technical additives. KS414 7.3
(230°C/2.16 kg)750 TDS QUICK SDS > REACH > CONTACT > BOPP Film 115°C SIT high C2 copolymer with slip and anti-blocking - narrow MWD. KS607 5
(230°C/2.16 kg)850 TDS QUICK SDS > REACH > CONTACT > BOPP film butene copolymer for high barrier metallisable film. KS689 5
(230°C/2.16 kg)350 TDS QUICK SDS > REACH > CONTACT > Propylene/alpha-olefin copolymer specially developed for the sealing layers of “coextruded bi-oriented film” for food and technical packaging. KV327 8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KV327 is a terpolymer with a medium content of comonomers and contains no special additives. Its stabilization package has been especially designed for metallisable film applications. KV353 9
(230°C/2.16 kg)650 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KV353 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for food and technical packaging. It contains anti-blocking additive only. KV357 9
(230°C/2.16 kg)650 TDS SSS QUICK SDS > REACH > CONTACT > ELTEX® P KV357 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for food and technical packaging. It doesn’t contain any technical additive. KV389 9
(230°C/2.16 kg)500 TDS QUICK SDS > REACH > CONTACT > ELTEX® P KV389 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for low sealing performance and lamination. ELTEX® P KV389 is specially designed for the so-called “double bubble process”. It contains no technical additives. -
MaterialHPPBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 100-AA12 12
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding applications of boxes, closures and household articles. 100-CA25 25
(230°C/2.16 kg)1600 TDS SSS QUICK SDS > REACH > CONTACT > Consumer products, transparent containers, syringes. 100-CA40 42
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Is intended for high speed injection moulding of household articles, lightweight dairy tubs and goblets and ice cream boxes. 100-CA50 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. 100-CA50S 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. 100-CB25 25
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Media packaging, technical moulding, fast cycling. 100-CC60 60
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > 100-CC60 is a high fluidity clarified homopolymer with antistatic properties designed for injection moulding. The grade has been designed with a very high rigidity and excellent clarity even when processing the material at low temperatures. 100-GA01 0.9
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, blow moulding, strapping. Good rigidity, high heat resistance. 100-GA02 2
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > HPP for trays, containers; good rigidity, high heat resistance,food containers, technical mouldings, strapping, tapes, ropes. 100-GA03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, tapes. Good rigidity, high heat resistance. 100-GA03S 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, tapes. Good rigidity, high heat resistance. 100-GA04 4
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, tapes. Good rigidity, high heat resistance. 100-GA09 9
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > General purpose injection moulding, standard cast film. 100-GA12 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. 100-GA12S 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. 100-GA35 35
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding master-batches & compounds applications. 100-GB06 6
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > HPP for trays, caps & closures, containers. Good rigidity, high heat resistance. 100-GB25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Thin wall parts, garden furniture. 100-GB25S 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > 100-GB25S is intended for injection moulding applications. It is particularly recommended for high speed moulding in multi-cavity tooling. 100-GD02 2
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Metallisation. 100-GD03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Metallisation. 100-HR25 25
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > High stiffness for appliances, technical moulding and food packaging. 100-MG03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications. 100-MG12 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications. 100-MG25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications. 100-NA00 0.3
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, blow moulding, strapping. Good rigidity, high heat resistance.1 100-NB03 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics. No anti-static agent. 100-NB03S 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics. No anti-static agent. 100-SB09 9
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > It is recommended for food packaging, textile packaging, flowers packaging, lamination films and stationary supplies. 100-XA03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > 100-XA03 is a polypropylene homopolymer grade used for the production of high tenacity staple fibres. 100-XZ12 12
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Long spin fine denier staple fibres for high speed nonwoven thermobonding lines. 101-CA06 6
(230°C/2.16 kg)1750 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products. Good rigidity, high heat resistance, good transparency. 101-CC60 60
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding of transparent packaging. 101-GA09 9
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Can be used as single layer films as well as in the core layer of coextruded films, for food packaging, hosiery packaging, shirt packaging, laminations films, … as well as for stationary supplies. 101-GB08 8
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Double bubble process. 101-GF02 2
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Coextruded biorented film using the tenter process. 101-SA09 9
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer PP for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. With slip agent. 101-XA12 12
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Staple fibres for carpet face yarn, continuous filament for straps & belts. 101-XA25 25
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Bulk Continuous Filament for carpet face yarn, Fine denier staple fibres. 101-ZB25 25
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > Industrial Spunbond Nonwovens. Suitable for high speed spinning processes. 102-CA03 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics and easy de-nesting. 102-CA03S 3
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Transparent trays and containers for food products. High stiffness, very good optics and easy de-nesting. 102-GD08 8
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Double bubble process, metallisation. 102-GF02 2
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > BOPP Film. Improved stretchability. 102-XA04 4
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > 102-XA04 is a polypropylene homopolymer grade used for the production of high tenacity staple fibres. 102-XA06 6
(230°C/2.16 kg)TDS SSS QUICK SDS > REACH > CONTACT > High tenacity staple fibres for needlepunched nonwovens (geotextiles). 103-CA03S 3
(230°C/2.16 kg)1900 TDS SSS QUICK SDS > REACH > CONTACT > Sheet extrusion and thermoforming applications. 104-CA03 3
(230°C/2.16 kg)1700 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion thermoforming, providing improved rigidity and impact resistance combined with a very high clarity, reduced cycle times and good antistatic properties. 150-GA02 2
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Trays and containers for food products, strapping, tapes, ropes. Good rigidity, high heat resistance. 150-GA03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > Thermoforming, tapes, carpet backing and geotextile. Good rigidity, high heat resistance. 150-ZA12 12
(230°C/2.16 kg)1250 TDS SSS QUICK SDS > REACH > CONTACT > Intended for the extrusion of fibres with the spunbond technology. It is also suitable for extrusion of continuous filaments (CF). 150-ZA25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Is intended for the extrusion of fine fibres with the spunbond technology, also suitable for injection molding applications. 151-GA02 2
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer polypropylene intended for sheets extrusion applications requiring a good melt strength and a good processability. 180-HR25 25
(230°C/2.16 kg)1800 TDS SSS QUICK SDS > REACH > CONTACT > Homopolymer with high stiffness for appliances, technical moulding and food packaging, manufactured with a non phthalate based catalyst. 194-NA25 25
(230°C/2.16 kg)1750 TDS SSS QUICK SDS > REACH > CONTACT > Transparent containers. HCS586 7
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated polypropylene homopolymer designed for cast film applications requiring: remarkably high stiffness, good optical properties, outstanding temperature resistance. HCW280 20
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Ultra high stiffness for appliances, technical moulding and food packaging. rPP1002 2.5
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion and Blow-moulding applications, non-food rPP1003 4.0
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > BOPP (double bubble process), non-food rPP1013 13
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1015GY1 15
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1025 25
(230°C/2.16 kg)1900 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays -
MaterialHPPBrandEltexBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 100-CA50 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. 100-CA50S 50
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Thin walled containers for dairy and fresh food, media packaging. -
MaterialHPPBrandEltex MEDBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 100-MG03 3
(230°C/2.16 kg)1450 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications. 100-MG12 12
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications. 100-MG25 25
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications. -
MaterialHPPBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HCS586 7
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated polypropylene homopolymer designed for cast film applications requiring: remarkably high stiffness, good optical properties, outstanding temperature resistance. HCW280 20
(230°C/2.16 kg)2200 TDS SSS QUICK SDS > REACH > CONTACT > Ultra high stiffness for appliances, technical moulding and food packaging. -
MaterialHPPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP1002 2.5
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion and Blow-moulding applications, non-food rPP1003 4.0
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > BOPP (double bubble process), non-food rPP1013 13
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1015GY1 15
(230°C/2.16 kg)1550 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP1025 25
(230°C/2.16 kg)1900 TDS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays -
MaterialHPP PowderBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS HL001PF 2.15
(230°C/2.16 kg)1600 TDS SSS QUICK SDS > REACH > CONTACT > HV001PF 10
(230°C/2.16 kg)1600 TDS SSS QUICK SDS > REACH > CONTACT > HW001P 25
(230°C/2.16 kg)1650 TDS SSS QUICK SDS > REACH > CONTACT > Master batches. Compounds for fibres. HY001P 45
(230°C/2.16 kg)1700 TDS SSS QUICK SDS > REACH > CONTACT > -
MaterialICPBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 300-CA06 6
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Toys, housewares, pails, appliances. 350-HM00 0.3
(230°C/2.16 kg)1850 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for non-pressure pipes, blow-moulding and sheet extrusion applications. 350-HP45 45
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > High flow, high rigidity, nucleated and antistatic impact copolymer specifically designed for fast cycling, thin walled injection moulding applications. 380-H100 90
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 381-H100 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 400-CA25 25
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares, toys. 400-CB08 8
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Crates, trays and large pails, batteries. 400-GA03 2.5
(230°C/2.16 kg)1250 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for sheets, trays, containers, artificial grass, stationery/confectionery films. Good heat resistance, very high impact. 400-GA05 5
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for stationery/confectionery films, sheets, trays, containers. Good heat resistance, very high impact. 400-IM01 0.8
(230°C/2.16 kg)1650 TDS SSS QUICK SDS > REACH > CONTACT > Injection moulding (fittings, manholes), non-pressure pipes. 400-NA01 1.5
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact. 401-CB50 50
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > ICP for toys, punnets and trays, yellow fat containers, ice cream containers, housewares. 401-NA01 1.2
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact. 401-NA06 6
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer nucleated for stationery films, sheets, trays, containers. Good heat resistance, very high impact. 402-CB12 12
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > ICP for pails, containers, crates, housewares, toys. 433-NA00 0.3
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Sheets; non-pressure pipes; good heat resistance, very high impact. 450-HP60 60
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > 451-HP40 40
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > ICP for housewares, pails, boxes. 480-HP90 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated and antistatic high flow high impact copolymer manufactured with a non phthalate based catalystdesigned for very fast cycling, thin walled injection moulding applications. 500-GA20 20
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Toys, containers, car batteries, luggage - ultra high impact, improved stiffness. 500-NA01 1.5
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA08 8
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA08 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA13 13
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA13 is a very high impact copolymer recommended for injection moulding of luggage, crates & boxes as well as for the production of compounds. 540-NA20 20
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA20 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA25 25
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA25 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA30 30
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA30 is a very high impact copolymer recommended for injection moulding as well as for the production of compounds. 540-NA60 60
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > 540-NA60 is a very high impact copolymer, high flow recommended for injection moulding as well as for the production of compounds. CAP986S 6
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > ICP for caps and closures for the packaging of carbonated soft drinks, manufactured with a non phthalate based catalyst. RF180 0.8
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Copolymer produced with a non-phthalate based catalyst with good heat resistance and very high impact. Used for synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films. rPP4013GY3 13
(230°C/2.16 kg)1500 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4019 19
(230°C/2.16 kg)1450 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4030GY3 30
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4050GY3 50
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. -
MaterialICPBrandEltex TUBBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 350-HM00 0.3
(230°C/2.16 kg)1850 TDS SSS QUICK SDS > REACH > CONTACT > Impact copolymer for non-pressure pipes, blow-moulding and sheet extrusion applications. 433-NA00 0.3
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > Sheets; non-pressure pipes; good heat resistance, very high impact. -
MaterialICPBrandRigidex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 350-HP45 45
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > High flow, high rigidity, nucleated and antistatic impact copolymer specifically designed for fast cycling, thin walled injection moulding applications. 380-H100 90
(230°C/2.16 kg)1550 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 381-H100 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > RIGIDEX® P 380-H100 is a nucleated and antistatic high flow impact copolymer specifically designed for very fast cycling, thin walled injection moulding applications. (Thin Walled Technical Mouldings, Yellow fat containers, Housewares) 450-HP60 60
(230°C/2.16 kg)1400 TDS SSS QUICK SDS > REACH > CONTACT > 451-HP40 40
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > ICP for housewares, pails, boxes. 480-HP90 90
(230°C/2.16 kg)1350 TDS SSS QUICK SDS > REACH > CONTACT > Nucleated and antistatic high flow high impact copolymer manufactured with a non phthalate based catalystdesigned for very fast cycling, thin walled injection moulding applications. CAP986S 6
(230°C/2.16 kg)1500 TDS SSS QUICK SDS > REACH > CONTACT > ICP for caps and closures for the packaging of carbonated soft drinks, manufactured with a non phthalate based catalyst. -
MaterialICPBrandEltexBusinessINEOS O & P Europe
-
MaterialICPBrandEltex PBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS RF180 0.8
(230°C/2.16 kg)1300 TDS SSS QUICK SDS > REACH > CONTACT > Copolymer produced with a non-phthalate based catalyst with good heat resistance and very high impact. Used for synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films. -
MaterialICPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP4013GY3 13
(230°C/2.16 kg)1500 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4019 19
(230°C/2.16 kg)1450 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4030GY3 30
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. rPP4050GY3 50
(230°C/2.16 kg)1400 TDS QUICK SDS > REACH > CONTACT > Crates & boxes, pails, containers, housewares. -
MaterialRCPBrandBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 200-CA02 1.7
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products, blown film. Good heat resistance, excellent transparency. 200-CA10 10
(230°C/2.16 kg)1200 TDS SSS QUICK SDS > REACH > CONTACT > Extrusion of fibres with the spunbond technology. It is also suitable for extrusion of continuous filaments (CF) 200-CA13 13
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 200-CA13 is designed for transparent injection moulded houseware, closures and food packaging needing goodimpact strength and excellent organoleptic properties. 200-CA13 is also suitable for injection stretch blow moulding (ISBM). 200-CA20 20
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Household goods, thin wall packaging, caps. 200-CA25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 200-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles. 200-CA25 has a property profile also suitable for injection stretch blow moulding (ISBM). 200-CA40 40
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 200-CA40 is a clarified random copolymer with a medium ethylene content for the fast production of clear thin-walled injection-moulded articles. 200-GA02 2
(230°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products. Good heat resistance, good transparency. 200-GA04 3.8
(230°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products. Good transparency, improved processability. 200-GB02 1.8
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Food packaging, textile packaging, flowers packaging, lamination films and stationary supplies. 200-MG02 1.8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C. 200-NA02 2
(230°C/2.16 kg)1000 TDS SSS QUICK SDS > REACH > CONTACT > Sheets, trays and containers for food products. Good heat resistance, excellent transparency. 200-SB08 8
(230°C/2.16 kg)950 TDS SSS QUICK SDS > REACH > CONTACT > It is intended for food, magazine or textile packaging, for lamination films… as well as for stationary supplies. 200-TG03 2
(230°C/2.16 kg)1100 TDS QUICK SDS > REACH > CONTACT > Polypropylene 200-TG03 is a random copolymer polypropylene suitable for extrusion applications. 201-MG02 1.8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > Extrusion blow-moulding of medical containers and medical devices, to the exclusion of implants. 203-CA25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 203-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles as transparent thin wall injection moulding, caps and closures, Housewares or clarified food containers. 203-NA02 1.9
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > High heat resistance with good clarity makes it ideal for various hot fill bottle applications. 203-OR25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 203-OR25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles. 203-OR25 presents itself with very low odour and smell. 205-CA25 25
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 205-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of high transparency articles. 205-CA25 has a property profile also suitable for injection stretch blow moulding (ISBM). 205-CA40 40
(230°C/2.16 kg)1100 TDS SSS QUICK SDS > REACH > CONTACT > 205-CA40 is a clarified random copolymer with a medium ethylene content for the fast production of high transparency thin-walled injection-moulded articles. 240-CA12 13
(230°C/2.16 kg)850 TDS SSS QUICK SDS > REACH > CONTACT > RCP for transparent packaging requiring excellent impact. 240-GA09 9
(230°C/2.16 kg)850 TDS SSS QUICK SDS > REACH > CONTACT > Intended for food, magazine or textile packaging, for lamination films… as well as for stationary supplies. 240-MS23 23
(230°C/2.16 kg)980 TDS SSS QUICK SDS > REACH > CONTACT > External barrel for disposable syringes (not pre-filled) / Transparent thin wall injection moulding. 240-NA02 1.5
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Clarified grade offering outstanding clarity for the production of small to medium sized bottles. 240-SB09 9
(230°C/2.16 kg)850 TDS SSS QUICK SDS > REACH > CONTACT > It is intended for food, magazine or textile packaging, for lamination films… as well as for stationary supplies. 242-NA02 1.8
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Highly clarified random copolymer for extrusion blow moulding, sheet extrusion, clear thermoformed packaging and high clarity blown films. Its formulation allows use for multilayer as well as monolayer structures. It is also suitable for injection stretch blow moulding (ISBM). 243-NA02 1.8
(230°C/2.16 kg)900 TDS SSS QUICK SDS > REACH > CONTACT > Designed for blow molding applications (mono and multi-layers) for food and non-food packaging of sauces, detergents and soaps, cosmetics and for sheets extrusion. rPP2013 13
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2028 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2030C 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food & cosmetic caps, closures and trays -
MaterialRCPBrandEltex MEDBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS 200-MG02 1.8
(230°C/2.16 kg)900 TDS QUICK SDS > REACH > CONTACT > Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C. 240-MS23 23
(230°C/2.16 kg)980 TDS SSS QUICK SDS > REACH > CONTACT > External barrel for disposable syringes (not pre-filled) / Transparent thin wall injection moulding. -
MaterialRCPBrandRecycl-INBusinessINEOS O & P EuropeGrades
GRADE MFR
(g/10 min)DENSITY
(kg/m³)FLEXURAL
MODULUS
(MPa)TECH
DATA
SHEETSSS SDS &
REGULATORY
CERTIFICATESREACH &
CHEMICAL
REGULATIONSCONTACT TYPICAL APPLICATIONS rPP2013 13
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2028 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food caps, closures and trays rPP2030C 32
(230°C/2.16 kg)1150 TDS SSS QUICK SDS > REACH > CONTACT > Injection-moulding of technical parts, non-food & cosmetic caps, closures and trays -
MaterialRCP PowderBrandEltex PBusinessINEOS O & P Europe
INEOS O & P USA
-
MaterialPPBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS 3950 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > High flow impact copolymer for automotive interiors H00G-00 0.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High stiffness grade for containers such as auto under-hood reservoirs H01H-00 1.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer grade for thermoformed sheet H02C-00 2.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High clarity, nucleated homopolymer grade for thermoformed packaging H02C-01 2.3
(230°C/2.16kg)1 TDS SDS RPS CONTACT > Low plate-out, high clarity, nucleated homopolymer grade for thermoforming H02C-04 2.3
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Thermoforming grade with new nucleator technology providing enhanced clarity H02G-02 2.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for BOPP, tape, twine, woven bag andthermoformed sheet H03G-06 3.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer designed for BOPP applications H03W-00 3.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose low water carry-over homopolymer grade H03W-01 3.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Low water carry-overhomopolymer for cordage, carpet backing, industrial fabrics, and geotextiles H03W-02 3.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Low water carryover general purpose homopolymer extrusion grade H04W-01 4.2
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for extrusion processing in applications that require low water carry-over. H05A-01 5.1
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Consumer products, housewares, medical packaging and rigid packaging. H05H-01 5.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances and automotive H07N-00 7.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Barefoot homopolymer with nucleation designed for extrusion processing H08U-00 8.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for fiber spinning applications requiring UV protection. H12E-00 12.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer grade with high antistat level for closure applications H12G-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer and closure applications H12G-01 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer suitable for extrusion and injection molding. Uses include extruded sheet, BOPP film, housewares, rigid packaging, caps and closures H12Z-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer & closure applications H12Z-02 12.8
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for closure applications H12Z-03 12.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer designed for optimal processing and surface appearance in injection molding applications H13M-00 13.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Medium-term heat aging homopolymer for packaging, closures & consumer products H14A-00 14.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated homopolymer for packaging, closures & consumer products H17U-00 17.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for carpet fiber applications. H19G-01 19.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose fiber grade homopolymer H20A-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grade with moderate levels of antistat H20E-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grades with high level of antistat H20G-00 20.0
(230°C/2.16kg)TDS SDS RPS CONTACT > General purpose homopolymer for consumer, housewares, and rigid packaging H20H-00 20.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances, consumer, housewares, and rigid packaging H20Z-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer and rigid packaging H28E-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer with high antistat levels for consumer, rigid packaging and closures applications H28G-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Controlled rheology polypropylene homopolymer designed for high tenacity yarn applications. H35G-02 35.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer. housewares, and rigid packaging H35Z-00 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated, high flow homopolymer for rigid packaging and housewares H35Z-02 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > nucleated, antistated, high flow rate, homopolymer for housewares, medical components and thin-walled rigid packaging H38G-02 38.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer for spunbonded nonwovens and partially oriented yarn (POY) H44N-00 47.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High flow rate, nucleated polypropylene to improve isotropic shrinkage and prevent warpage H53N-00 53.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Nucleated high MFR homopolymer with lubricant for high speed injection molding applications, such as media and thin walled packaging and housewares L10G-00 10.0
(230°C/2.16kg)2.5 TDS SDS RPS CONTACT > General impact grade designed for injection molding applications L12N-00 12.0
(230°C/2.16kg)5.7 TDS SDS RPS CONTACT > High gloss, nucleated impact copolymer for automotive, consumer and housewares applications L12Z-00 12.0
(230°C/2.16kg)2.6 TDS SDS RPS CONTACT > Antistatted and nucleated impact copolymer for housewares, consumer products and toys L12Z-01 12.0
(230°C/2.16kg)3.4 TDS SDS RPS CONTACT > High gloss, nucleated and antistatted impact copolymer for automotive, toys, consumer and housewares applications L34N-00 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > Nucleated, low gloss impact copolymer for housewares and consumer products L70Z-01 70.0
(230°C/2.16kg)2.3 TDS SDS RPS CONTACT > Nucleated, antistated, high flow, medium impact impact coplymer for injection molding applications L90G-00 90.0
(230°C/2.16kg)0.9100 1.1 TDS SDS RPS CONTACT > High MFR impact copolymer for high speed injection molding and compounding. N00M-00 0.45
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N00N-00 0.35
(230°C/2.16kg)NB TDS SDS RPS CONTACT > High-impact impact copolymer designed for non-pressure structured wall pipe N01N-00 1.9
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for freezer-to-microwave thermoformed packaging N02G-00 2.5
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N05U-00 5.0
(230°C/2.16kg)7.4 TDS SDS RPS CONTACT > UV stabilized grade for materials handling N12N-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated grade with good stiffness/impact balance for compounding and injection molding applications. N12Z-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistated impact copolymer designed for injection molding applications. N12Z-01 14.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistatic polypropylene impact copolymer designed for injection molding applications. N20G-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for toys andconsumer products N20N-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistattedimpact copolymer with good stiffness/impact balance for materials handling, toys and consumer products R01A-00 1.9
(230°C/2.16kg)1.6 TDS SDS RPS CONTACT > Balance of stiffness, impact, contact clarity; suitable for hot fill R01C-00 1.9
(230°C/2.16kg)5.6 TDS SDS RPS CONTACT > Clarified grade with balance of stiffness, impact; suitable for hot fill R01C-01 1.9
(230°C/2.16kg)6.4 TDS SDS RPS CONTACT > Clarified, low plate-out grade with balance of stiffness, impact; hot fill R02C-00 2.3 (230°C/2.16kg) 0.9030 0.8 TDS SDS RPS CONTACT > Sheet extrusion and thermoforming of clear food containers and lids. R08G-00 8.0 (230°/2.16kg) 0.9000 1.0 TDS SDS RPS CONTACT > Film, blow molding, expanded PP beads, injection molding R08S-00 8 .0
(230°C/2.16kg)1.4 TDS SDS RPS CONTACT > Random copolymer with slip agent R12C-01 12.0
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Low antistat, clarified grade for injection stretch blow molding R35C-01 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated version of R35C-00 R35C-02 35.0
(230°C/2.16kg)1.1 TDS SDS RPS CONTACT > Clarified and lubricated random copolymer for medium and thin wall molding applications giving a bluish hue of enhanced and distinctive clarity R35C-03 35.0
(230°C/2.16kg)0.9000 1.1 TDS SDS RPS CONTACT > Thin wall clear parts R55C-00 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Clarified and antistatic random copolymer for thin wall molding applications requiring very good mold filling capabilities, excellent clarity, fast cycle times and good stiffness-to-impact properties balance R55C-01 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Lubricated and antistatic random copolymer designed for high-speed injection molding of medium to thin walled parts requiring excellent clarity, fast cycle times and ease of de-nesting T00G-00 0.6
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T00G-02 0.6
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T10G-03 10.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > TPO designed for roofing, compounding and soft applications