Productzoeker
INEOS-producten leveren een belangrijke bijdrage aan het redden van levens, het verbeteren van de gezondheid en het verhogen van de levensstandaard voor mensen over de hele wereld. Onze bedrijven produceren de grondstoffen die essentieel zijn voor de productie van een breed scala aan goederen, variërend van auto-onderdelen tot medische toepassingen, mobiele telefoons tot bouw.
Showing 49 Results
INEOS O & P USA
-
MaterialPEBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS A4040 4.1 MI2
(190°C/2.16kg)0.9470 TDS SDS RPS CONTACT > Silane process crosslinkable pipe grade A60-70-162 0.72 MI2
(190°C/2.16kg)0.9630 TDS SDS RPS CONTACT > Resin designed for use in dairy, juice, and water bottles B50-35H-176 0.35 MI2
(190°C/2.16kg)0.9500 TDS SDS RPS CONTACT > Household chemical, others requiring good impact, ESCR, antistat B53-35H-011 0.35 MI2
(190°C/2.16kg)0.9550 TDS SDS RPS CONTACT > Household chemical, personal care; good top-load/impact balance B54-25H-127 0.35 MI2
(190°C/2.16kg)0.9550 TDS SDS RPS CONTACT > Household chemical, personal care; good top-load/impact balance, antistat BR52-22-206 0.22 MI2
(190°c/21.6kg)0.9520 TDS SDS RPS CONTACT > Booster resin for consumer packaging bottles, household chemical, personal care bottles, and liquid food bottles CAP311US 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > Applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties CAP311US1 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > Application requiring excellent processability, high rigidity, enhanced stress cracking resistance, and excellent organoleptic properties. CAP311US2 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > Applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties CAP508US 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > Certified as low taste and is intended for packaging in direct contact with beverages. CAP508US1 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > Certified as low taste and is intended for packaging in direct contact with beverages CAP508US2 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > Certified as low taste and is intended for packaging in direct contact with beverages. CAP508US3 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > Certified as low taste and is intended for packaging in direct contact with beverages. CP53-30 0.35 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > Corrugated pipe grade G50-100 10.0 HLMI
(190°C/21.6kg)0.9500 TDS SDS RPS CONTACT > Copolymer with excellent ESCR and impact, for large part blow molding HP53-25-155 0.22 MI2
(190°C/2.16kg)0.9520 TDS SDS RPS CONTACT > High ESCR for automotive such as HVAC and under-hood reservoirs J50-1000-178 11.0 MI2
(190°C/2.16 kg)0.9510 TDS SDS RPS CONTACT > Organoleptic certifiedcopolymer for beverage closures J50-1000-181 11.0 MI2
(190°C/2.16kg)0.9510 TDS SDS RPS CONTACT > Lubricated version of J50-1000-178 J50-1000-187 11.0 MI2
(190°C/2.16kg)0.9510 TDS SDS RPS CONTACT > Lubricated version of J50-1000-178 J50-170-201 1.7 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > Approved for use in injection-molded automotive SCR tanks and large parts that benefit from an optimized balance of flow characteristics, low temperature impact performance and high stress crack resistance. J50-2000-119 20.0 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > High flow copolymer for Caps & Closures applications J50-200-178 2.0 MI2
(190°C/2.16kg)0.9520 TDS SDS RPS CONTACT > Organoleptic certifiedcopolymer for carbonated soft drink closures J52-08-226 9.0 HLMI
(190°C/21.6kg)0.9510 TDS SDS RPS CONTACT > Copolymer for thin gauge blown film applications where good processability, high stiffness and excellent strength are required J52-08-234 8.0 HLMI
(190°C/21.6kg)0.9510 TDS SDS RPS CONTACT > Thin gauge blown film products J60-1700-173 16.0 MI2
(190°C/2.16kg)0.9610 TDS SDS RPS CONTACT > High flow homopolymer designed for specialty compounding J60-800-178 8.0 MI2
(190°C/2.16kg)0.9610 TDS SDS RPS CONTACT > Organoleptic certified homopolymer for beverage closures K38-20-160 0.2 MI2
(190°C/2.16kg)0.9390 TDS SDS RPS CONTACT > Yellow, UV-stabilized, medium density compounded PE designed for natural gas distribution pipe and fittings K38-20-188 0.2 MI2
(190°C/2.16kg)0.9390 TDS SDS RPS CONTACT > UV-stabilized, natural, medium density PE grade for natural gas pipe and fittings K44-11-128 12.0 HLMI
(190°C/21.6kg)0.9470 TDS SDS RPS CONTACT > High molecular weight, excellent ESCR and impact for large parts K44-15-122 12.5 HLMI
(190°C/21.6kg)0.9440 TDS SDS RPS CONTACT > Natural, PE3608 listed small diameter water, sewer and industrial pipe grade K44-24-122 30.0 HLMI
(190°C/21.6kg)0.9440 TDS SDS RPS CONTACT > Pipe coating grade K46-06-185 4.2 HLMI
(190°C/21.6kg)0.9460 TDS SDS RPS CONTACT > High molecular weight resin for fuel tanks and other large parts T50-1000-178 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding T50-1000-181 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding for applications requiring lubrication. T50-1000-187 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding for applications requiring lubrication. T50-2000-119 20.0 MI2
(190°/2.16 kg0.9530 TDS SDS RPS CONTACT > General purpose injection molding T50-200-178 2.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > Injection molding applications which require high impact resistance and good environmental stress crack resistance T50-500-171 6.5 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > General purpose injection molding grade T50-500-196 6.5 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > General purpose injection molding grade; suitable for use as a pail resin T50-800-01 8.0 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > General purpose injection molding and consumer products T60-1200-119 12.0 MI2
(190°C/2.16 Kg)0.9600 TDS SDS RPS CONTACT > T60-800-119 8.0 MI2
(190°/2.16 kg)0.9610 TDS SDS RPS CONTACT > High stiffness grade for materials handling T60-800-229 8.0 MI2
(190°/2.16 kg)0.9600 TDS SDS RPS CONTACT > UV-stabilized general purpose injection molding TC46-25 0.3 MI2
(190°C/2.16kg)0.9480 TDS SDS RPS CONTACT > Telecommunications conduit grade TC46-25-236 0.3 MI2
(190°C/2.16kg)0.9480 3.6 TDS SDS RPS CONTACT > Thin walled Extrusion/ Drip Irrigation Tape TUB121B 8.5 HLMI
(190°C/21.6kg)0.9590 TDS SDS RPS CONTACT > Pre-compounded black, bimodal copolymer grade suitable for large diameter water, industrial, natural gas, and mining pipe. TUB121GN 8.5 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal copolymer grade suitable for large diameter water, natural gas and mining pipe. TUB121N 8.5 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal copolymer grade suitable for large diameter water, natural gas and mining pipe. TUB121NTW 8.0 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal copolymer designed for large diameter, thick wall piping for potable water, industrial, and mining applications.