Productzoeker
INEOS-producten leveren een belangrijke bijdrage aan het redden van levens, het verbeteren van de gezondheid en het verhogen van de levensstandaard voor mensen over de hele wereld. Onze bedrijven produceren de grondstoffen die essentieel zijn voor de productie van een breed scala aan goederen, variërend van auto-onderdelen tot medische toepassingen, mobiele telefoons tot bouw.
Showing 73 Results
INEOS O & P USA
-
MaterialPPBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS 3950 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > High flow impact copolymer for automotive interiors H00G-00 0.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High stiffness grade for containers such as auto under-hood reservoirs H01H-00 1.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer grade for thermoformed sheet H02C-00 2.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High clarity, nucleated homopolymer grade for thermoformed packaging H02C-01 2.3
(230°C/2.16kg)1 TDS SDS RPS CONTACT > Low plate-out, high clarity, nucleated homopolymer grade for thermoforming H02C-04 2.3
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Thermoforming grade with new nucleator technology providing enhanced clarity H02G-02 2.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for BOPP, tape, twine, woven bag andthermoformed sheet H03G-06 3.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer designed for BOPP applications H03W-00 3.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose low water carry-over homopolymer grade H03W-01 3.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Low water carry-overhomopolymer for cordage, carpet backing, industrial fabrics, and geotextiles H03W-02 3.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Low water carryover general purpose homopolymer extrusion grade H04W-01 4.2
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for extrusion processing in applications that require low water carry-over. H05A-01 5.1
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Consumer products, housewares, medical packaging and rigid packaging. H05H-01 5.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances and automotive H07N-00 7.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Barefoot homopolymer with nucleation designed for extrusion processing H08U-00 8.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for fiber spinning applications requiring UV protection. H12E-00 12.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer grade with high antistat level for closure applications H12G-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer and closure applications H12G-01 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer suitable for extrusion and injection molding. Uses include extruded sheet, BOPP film, housewares, rigid packaging, caps and closures H12Z-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer & closure applications H12Z-02 12.8
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for closure applications H12Z-03 12.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer designed for optimal processing and surface appearance in injection molding applications H13M-00 13.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Medium-term heat aging homopolymer for packaging, closures & consumer products H14A-00 14.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated homopolymer for packaging, closures & consumer products H17U-00 17.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for carpet fiber applications. H19G-01 19.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose fiber grade homopolymer H20A-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grade with moderate levels of antistat H20E-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grades with high level of antistat H20G-00 20.0
(230°C/2.16kg)TDS SDS RPS CONTACT > General purpose homopolymer for consumer, housewares, and rigid packaging H20H-00 20.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances, consumer, housewares, and rigid packaging H20Z-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer and rigid packaging H28E-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer with high antistat levels for consumer, rigid packaging and closures applications H28G-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Controlled rheology polypropylene homopolymer designed for high tenacity yarn applications. H35G-02 35.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer. housewares, and rigid packaging H35Z-00 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated, high flow homopolymer for rigid packaging and housewares H35Z-02 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Nucleated, antistated, high flow rate, homopolymer for housewares, medical components and thin-walled rigid packaging H38G-02 38.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer for spunbonded nonwovens and partially oriented yarn (POY) H44N-00 47.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High flow rate, nucleated polypropylene to improve isotropic shrinkage and prevent warpage H53N-00 53.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Nucleated high MFR homopolymer with lubricant for high speed injection molding applications, such as media and thin walled packaging and housewares L10G-00 10.0
(230°C/2.16kg)2.5 TDS SDS RPS CONTACT > General impact grade designed for injection molding applications L12N-00 12.0
(230°C/2.16kg)5.7 TDS SDS RPS CONTACT > High gloss, nucleated impact copolymer for automotive, consumer and housewares applications L12Z-00 12.0
(230°C/2.16kg)2.6 TDS SDS RPS CONTACT > Antistatted and nucleated impact copolymer for housewares, consumer products and toys L12Z-01 12.0
(230°C/2.16kg)3.4 TDS SDS RPS CONTACT > High gloss, nucleated and antistatted impact copolymer for automotive, toys, consumer and housewares applications L34N-00 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > Nucleated, low gloss impact copolymer for housewares and consumer products L70Z-01 70.0
(230°C/2.16kg)2.3 TDS SDS RPS CONTACT > Nucleated, antistated, high flow, medium impact impact coplymer for injection molding applications L90G-00 90.0
(230°C/2.16kg)0.9100 1.1 TDS SDS RPS CONTACT > High MFR impact copolymer for high speed injection molding and compounding. N00M-00 0.45
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N00N-00 0.35
(230°C/2.16kg)NB TDS SDS RPS CONTACT > High-impact impact copolymer designed for non-pressure structured wall pipe N01N-00 1.9
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for freezer-to-microwave thermoformed packaging N02G-00 2.5
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N05U-00 5.0
(230°C/2.16kg)7.4 TDS SDS RPS CONTACT > UV stabilized grade for materials handling N12N-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated grade with good stiffness/impact balance for compounding and injection molding applications. N12Z-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistated impact copolymer designed for injection molding applications. N12Z-01 14.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistatic polypropylene impact copolymer designed for injection molding applications. N20G-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for toys andconsumer products N20N-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistattedimpact copolymer with good stiffness/impact balance for materials handling, toys and consumer products R01A-00 1.9
(230°C/2.16kg)1.6 TDS SDS RPS CONTACT > Balance of stiffness, impact, contact clarity; suitable for hot fill R01C-00 1.9
(230°C/2.16kg)5.6 TDS SDS RPS CONTACT > Clarified grade with balance of stiffness, impact; suitable for hot fill R01C-01 1.9
(230°C/2.16kg)6.4 TDS SDS RPS CONTACT > Clarified, low plate-out grade with balance of stiffness, impact; hot fill R02C-00 2.3
(230°C/2.16kg)0.9030 0.8 TDS SDS RPS CONTACT > Sheet extrusion and thermoforming of clear food containers and lids. R08G-00 8.0
(230°/2.16kg)0.9000 1.0 TDS SDS RPS CONTACT > Film, blow molding, expanded PP beads, injection molding R08S-00 8 .0
(230°C/2.16kg)1.4 TDS SDS RPS CONTACT > Random copolymer with slip agent R12C-01 12.0
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Low antistat, clarified grade for injection stretch blow molding R35C-01 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated version of R35C-00 R35C-02 35.0
(230°C/2.16kg)1.1 TDS SDS RPS CONTACT > Clarified and lubricated random copolymer for medium and thin wall molding applications giving a bluish hue of enhanced and distinctive clarity R35C-03 35.0
(230°C/2.16kg)0.9000 1.1 TDS SDS RPS CONTACT > Thin wall clear parts R55C-00 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Clarified and antistatic random copolymer for thin wall molding applications requiring very good mold filling capabilities, excellent clarity, fast cycle times and good stiffness-to-impact properties balance R55C-01 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Lubricated and antistatic random copolymer designed for high-speed injection molding of medium to thin walled parts requiring excellent clarity, fast cycle times and ease of de-nesting rPP-H03-301G 3.0
(230C/2.16 kg)0.9200 0.9 TDS SDS RPS CONTACT > rPP-H03-301G is a gray polypropylene homopolymer with 30% polyolefin PCR designed for thermoformed parts and compounded polymers T00G-00 0.60
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T00G-02 0.60
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T10G-03 10.00
(230°C/2.16kg)NB TDS SDS RPS CONTACT > TPO designed for roofing, compounding and soft applications -
MaterialPPBrandRecycl-INBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS rPP-H03-301G 3.0
(230C/2.16 kg)0.9200 0.9 TDS SDS RPS CONTACT > rPP-H03-301G is a gray polypropylene homopolymer with 30% polyolefin PCR designed for thermoformed parts and compounded polymers