INEOS Products

Products Finder

Advanced search

Filter

Showing 451 Results

INEOS O & P Europe

Compound Eltex P

MaterialCompound
BrandEltex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
HEY500	25 (230°C/2.16 kg)	910	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE compound for extrusion and co-extrusion coating applications in which high speeds with various substrates are involved.

EBA

MaterialEBA
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
B24D230	0.35 (190°C/2.16 kg)	924	(N/A)	TDS	SSS	SDS	CONTACT >	Jacketing EBA (8% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound.
B24D760	0.3 (190°C/2.16 kg)	924	(N/A)	TDS	SSS	SDS	CONTACT >	EBA copolymer for elastic packaging film.
B26E730	0.60 (190°C/2.16 kg)	925	(N/A)	TDS	SSS	SDS	CONTACT >	B26E730 has been developed to give a very strong and tough film with excellent cold and outdoor properties for applications such as Stretch hoods, construction film, heavy-duty bags.
B28N230	8 (190°C/2.16 kg)	924	(N/A)	TDS	SSS	SDS	CONTACT >	Jacketing EBA (15% BA), can accept high amounts of filler and could be used as base for polymer for Flame retardant compound.
B30D730	0.5 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	B30D730 is particularly suitable for the applications requiring good elastic recovery and/or low melting points: Multilayer stretch hood film, Low-melting-point ingredient bags for the rubber industry, Soft film

EMAA

MaterialEMAA
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
M21N430	7.5 (190°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	Ethylene-MethAcrylic-Acid-Copolymer (EMAA) for extrusion coating with 1,2 % MAA.
M24N430	7.5 (190°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	Ethylene-MethAcrylic-Acid-Copolymer (EMAA) for extrusion coating with 3,7 % MAA.
M28N430	8 (190°C/2.16 kg)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Ethylene-MethAcrylic-Acid-Copolymer (EMAA) for extrusion coating with 8,3 % MAA.
M29N430	8.0 (190°C/2.16 kg)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	M29N430 is a specialty extrusion coating resin with improved adhesion characteristics. Main application fields include aluminium foil and metallized film coating both for industrial use, food and flexible packaging.
M32P430	10 (190°C/2.16 kg)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	M32P430 is a specialty extrusion coating resin with improved adhesion characteristics. Main application fields include aluminium foil and metallized film coating both for industrial use, food and flexible packaging.

HDPE Eltex

MaterialHDPE
BrandEltex
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
A3180N1852	21 (190°C/2.16 kg)	957	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates and master-batches, PEX, Textile coating and Injection.
A3180PN1852	21.5 (190°C/2.16 kg)	957	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches, textile coating.
A4009MFN1325	0.9 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	Monofilaments (fishing nets, protective nets for construction, agriculture protective nets, ...).
A4009PFN1324	0.85 (190°C/2.16 kg)	959	(N/A)	TDS	SSS	SDS	CONTACT >	Chlorinated HDPE powder. Carrier for colour concentrates, master-batches and wood plastic composites.
A4040	3.5 (190°C/2.16 kg)	944	(N/A)	TDS	(N/A)	SDS	CONTACT >	Base resin for crosslinkable PE-Xb pipes.
A4040P	3.5 (190°C/2.16 kg)	943.5	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches and XLPE.
A4090P	11 (190°C/2.16 kg)	951	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches.
A5006FN1280	1.9 (190°C/5 kg)	944	(N/A)	TDS	SSS	SDS	CONTACT >	Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...).
A5006FN1285	1.6 (190°C/5 kg)	944	(N/A)	TDS	SSS	SDS	CONTACT >	Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...).
A5006PFN1281	0.6 (190°C/2.16 kg)	943.5	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches.
B2020LG/34	1.8 (190°C/2.16 kg)	990	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk.
B4020LG/34	1.8 (190°C/2.16 kg)	985	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of milk bottles, 4.5% titanium dioxide.
B4020LGN1963	1.8 (190°C/2.16 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of both pasteurised and sterilized milk (in bottle sterilization).
B4020N1331	2.2 (190°C/2.16 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of sparkling water and carbonated soft drinks ; slip agent free.
B4020N1332	1.9 (190°C/2.16 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of carbonated soft drink s; contains a slip agent (UV sensitive).
B4020N1343	2.2 (190°C/2.16 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of sparkling water and carbonated soft drinks ; contains a slip agent.
B4922/20N3000	0.3 (190°C/5 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	Yellow stripe for TUB121N3000, gas.
B4922/40N3000	0.3 (190°C/5 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	Blue stripe for TUB121N3000, water.
B4922/50N3000	0.3 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	Orange stripe for TUB121N3000, gas.
B4922/90N3000	0.3 (190°C/5 kg)	957	(N/A)	TDS	(N/A)	SDS	CONTACT >	Brown stripe for TUB121N3000, sewage.
B4922N3004	0.3 (190°C/5 kg)	949	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® B4922N3004 is a natural high-density polyethylene designed for extrusion production process, non-pressure pipe, industrial and chemical parts and sheets production.
B6921/20N2010	0.45 (190°C/5 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	Yellow stripe for TUB131N2010, gas.
B6921/40N2010	0.45 (190°C/5 kg)	948	(N/A)	TDS	(N/A)	SDS	CONTACT >	Blue stripe for TUB131N2010, water.
B6922N1347	0.35 (190°C/5 kg)	944	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® B6922N1347 is a high-density polyethylene copolymer grade specially developed for theproduction of sporting gun cartridges by extrusion.
HD3540UA	4.0 (190°C/2.16 kg)	935	(N/A)	TDS	SSS	SDS	CONTACT >	rotational moulded items with good impact resistance, Septic tanks, Chemical storage tanks
HD3850UA	4.5 (190°C/2.16 kg)	938	(N/A)	TDS	SSS	SDS	CONTACT >	Rotomoulding application; water tanks, chemical tanks, agricultural, play ground, recycling banks.
HD3930UA	3.0 (190°C/2.16 kg)	939	(N/A)	TDS	SSS	SDS	CONTACT >	Rotomoulding application; various tank applications.
HD4330UA	3.0 (190°C/2.16 kg)	943	(N/A)	TDS	SSS	SDS	CONTACT >	Rotomoulding applications ; fuel tanks, kayak, manhole inspection draining tank, underground parts.
HD4620BM	2.0 (190°C/2.16 kg)	946	(N/A)	TDS	SSS	SDS	CONTACT >	High-density polyethylene copolymer grade with a bimodal structure being specially developed for the production of injection moulded articles where very high ESCR is needed.
HD4706EA-Y	1.7 (190°C/5 kg)	947.5	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® HD4706EA-Y is a high-density polyethylene copolymer grade intended for the production of tapes from cast and blown film.
HD5211EA-B	11 (190°C/2.16 kg)	951	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of still mineral water, juices and aromatized beverages ; very easy processing, low warpage, slip agent free.
HD5211GA-B	11 (190°C/2.16 kg)	951	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of juices and aromatized beverages; very easy processing, low warpage, contains a slip agent (UV sensitive).
HD5240GA-B	4 (190°C/2.16 kg)	950	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of juices and slightly carbonated or pressurized aromatized beverages ; easy processing, low warpage, contains a slip agent (UV sensitive).
HD6070EA-B	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps anc closures with direct beverage contact for still mineral water, aromatized water and juices; easy processing, slip agent free.
K38-20/40	0.9 (190°C/5 kg)	943.5	(N/A)	TDS	(N/A)	SDS	CONTACT >	Blue stripe for TUB171 and PC002-50R102, water.
LGB163N2045	0.4 (190°C/2.16 kg)	990	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for blow moulding of bottles, suitable for the packaging of UHT milk.
LGB263N2070	0.7 (190°C/2.16 kg)	990	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk.
LRB711	1.5 (190°C/21.6 kg)	995	(N/A)	TDS	(N/A)	SDS	CONTACT >	Filler pipes and other parts requiring conductive properties.
MMPE0950/30	(N/A)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Anti-acid used for 6-layers bottle.
MMPE3940/10	(N/A)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Carbon black concentrate for the pigmentation of the middle black layer of co-extruded bottle.
MMPE3940/10FDA	(N/A)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Carbon black concentrate for the pigmentation of the middle black layer of co-extruded bottle. Compliant to FDA.
PC002-50R968	0.85 (190°C/5 kg)	943	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for drinking water transport.
TUB121	0.45 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure fittings for gas and drinking water transport.
TUB121N3000	0.3 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for gas and drinking water transport, very large diameter pipes.
TUB123N6000	0.33 (190°C/5 kg)	980	(N/A)	TDS	(N/A)	SDS	CONTACT >	White compound for pipe coating.
TUB124N2025	0.32 (190°C/5 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for drinking water transport.
TUB125N2025	0.3 (190°C/5 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for gas transport.
TUB131N2010	0.46 (190°C/5 kg)	954	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for gas and drinking water transport.
TUB171	0.85 (190°C/5 kg)	949	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for gas and drinking water transport.
TUB172	0.85 (190°C/5 kg)	938	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for gas transport.

HDPE

MaterialHDPE
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
A3180N1852	21 (190°C/2.16 kg)	957	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates and master-batches, PEX, Textile coating and Injection.
A3180PN1852	21.5 (190°C/2.16 kg)	957	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches, textile coating.
A4009MFN1325	0.9 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	Monofilaments (fishing nets, protective nets for construction, agriculture protective nets, ...).
A4009PFN1324	0.85 (190°C/2.16 kg)	959	(N/A)	TDS	SSS	SDS	CONTACT >	Chlorinated HDPE powder. Carrier for colour concentrates, master-batches and wood plastic composites.
A4040	3.5 (190°C/2.16 kg)	944	(N/A)	TDS	(N/A)	SDS	CONTACT >	Base resin for crosslinkable PE-Xb pipes.
A4040P	3.5 (190°C/2.16 kg)	943.5	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches and XLPE.
A4090P	11 (190°C/2.16 kg)	951	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches.
A5006FN1280	1.9 (190°C/5 kg)	944	(N/A)	TDS	SSS	SDS	CONTACT >	Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...).
A5006FN1285	1.6 (190°C/5 kg)	944	(N/A)	TDS	SSS	SDS	CONTACT >	Tapes from cast and blown film (knitted netting and bags for fruit and vegetable bags, bale nets wrap, greenhouses, artificial grass, ...).
A5006PFN1281	0.6 (190°C/2.16 kg)	943.5	(N/A)	TDS	SSS	SDS	CONTACT >	Carrier for colour concentrates, master-batches.
B2020LG/34	1.8 (190°C/2.16 kg)	990	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk.
B4020LG/34	1.8 (190°C/2.16 kg)	985	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of milk bottles, 4.5% titanium dioxide.
B4020LGN1963	1.8 (190°C/2.16 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of both pasteurised and sterilized milk (in bottle sterilization).
B4020N1331	2.2 (190°C/2.16 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of sparkling water and carbonated soft drinks ; slip agent free.
B4020N1332	1.9 (190°C/2.16 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of carbonated soft drink s; contains a slip agent (UV sensitive).
B4020N1343	2.2 (190°C/2.16 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of sparkling water and carbonated soft drinks ; contains a slip agent.
B4922/20N3000	0.3 (190°C/5 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	Yellow stripe for TUB121N3000, gas.
B4922/40N3000	0.3 (190°C/5 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	Blue stripe for TUB121N3000, water.
B4922/50N3000	0.3 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	Orange stripe for TUB121N3000, gas.
B4922/90N3000	0.3 (190°C/5 kg)	957	(N/A)	TDS	(N/A)	SDS	CONTACT >	Brown stripe for TUB121N3000, sewage.
B4922N3004	0.3 (190°C/5 kg)	949	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® B4922N3004 is a natural high-density polyethylene designed for extrusion production process, non-pressure pipe, industrial and chemical parts and sheets production.
B6921/20N2010	0.45 (190°C/5 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	Yellow stripe for TUB131N2010, gas.
B6921/40N2010	0.45 (190°C/5 kg)	948	(N/A)	TDS	(N/A)	SDS	CONTACT >	Blue stripe for TUB131N2010, water.
B6922N1347	0.35 (190°C/5 kg)	944	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® B6922N1347 is a high-density polyethylene copolymer grade specially developed for theproduction of sporting gun cartridges by extrusion.
BPD4720	0.60 (190°C/2.16 kg)	945	(N/A)	TDS	SSS	SDS	CONTACT >	BPD4720 is a natural high-density polyethylene grade designed for the extrusion of jackets for power cables.
BPD4720UA	0.60 (190°C/2.16 kg)	945	(N/A)	TDS	SSS	SDS	CONTACT >	BPD4720UA is a natural high-density polyethylene grade designed for the extrusion of jackets for power cables.
CAP311	4 (190°C/2.16 kg)	960	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of still mineral water, juices and slightly carbonated or pressurized beverages ; very good processability, high rigidity, good ESCR, slip agent free.
CAP311S1	4 (190°C/2.16 kg)	960	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of aromatized waters, juices and slightly carbonated or pressurized beverages ; very good processability, high rigidity, good ESCR, contains a slip agent (UV sensitive).
CAP504HR	0.6 (190°C/2.16 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high rigidity, high ESCR, good processability, slip agent free.
CAP504HRS2	0.6 (190°C/2.16 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of carbonated soft drinks, especially in reduced weight cap designs ; high rigidity, high ESCR, good processability, contains a slip agent (UV sensitive).
CAP504HRS3	0.6 (190°C/2.16 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high rigidity, high ESCR, good processability, contains a slip agent.
CAP508	1.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high ESCR, very good processability, slip agent free.
CAP508S2	1.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of carbonated soft drinks, especially in reduced weight cap designs ; high ESCR, very good processability, contains a slip agent (UV sensitive).
CAP508S3	1.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high ESCR, very good processability, contains a slip agent.
CAP602	0.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; very high ESCR, high impact strength, slip agent free.
CAP602S2	0.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of carbonated soft drinks, especially in reduced weight cap designs ; very high ESCR, high impact strength, contains a slip agent (UV sensitive).
E5018	0.9 (190°C/5 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE grade for non-pressure pipe extrusion.
E5315	0.6 (190°C/5 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE grade for non-pressure pipe extrusion.
HD3540UA	4.0 (190°C/2.16 kg)	935	(N/A)	TDS	SSS	SDS	CONTACT >	rotational moulded items with good impact resistance, Septic tanks, Chemical storage tanks
HD3575UA	7.5 (190°C/2.16 kg)	935	(N/A)	TDS	SSS	SDS	CONTACT >	Linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding.
HD3850UA	4.5 (190°C/2.16 kg)	938	(N/A)	TDS	SSS	SDS	CONTACT >	Rotomoulding application; water tanks, chemical tanks, agricultural, play ground, recycling banks.
HD3855UA	5.0 (190°C/2.16 kg)	938	(N/A)	TDS	SSS	SDS	CONTACT >	Linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding.
HD3930UA	3.0 (190°C/2.16 kg)	939	(N/A)	TDS	SSS	SDS	CONTACT >	Rotomoulding application; various tank applications.
HD4330UA	3.0 (190°C/2.16 kg)	943	(N/A)	TDS	SSS	SDS	CONTACT >	Rotomoulding applications ; fuel tanks, kayak, manhole inspection draining tank, underground parts.
HD4620BM	2.0 (190°C/2.16 kg)	946	(N/A)	TDS	SSS	SDS	CONTACT >	High-density polyethylene copolymer grade with a bimodal structure being specially developed for the production of injection moulded articles where very high ESCR is needed.
HD4706EA-Y	1.7 (190°C/5 kg)	947.5	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® HD4706EA-Y is a high-density polyethylene copolymer grade intended for the production of tapes from cast and blown film.
HD4820EA	2.5 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Specially formulated grade for exceptional levels of gloss.
HD5050EA	4 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE grade for caps & closures, crates, pails, houseware.
HD5050UA	4 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Dustbins, pallets, crates.
HD5060UA	5.5 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5060UA is a linear copolymer polyethylene grade supplied in pellet form for injection moulding application.
HD5211EA	11 (190°C/2.16 kg)	951	(N/A)	TDS	SSS	SDS	CONTACT >	Pails, houseware, cartridges, toys, caps & closures, over caps.
HD5211EA-B	11 (190°C/2.16 kg)	951	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of still mineral water, juices and aromatized beverages ; very easy processing, low warpage, slip agent free.
HD5211EA-Y	11 (190°C/2.16 kg)	951	(N/A)	TDS	SSS	SDS	CONTACT >	Continuous or staple fibres ; non-woven (mainly medical & hygienic use).
HD5211GA-B	11 (190°C/2.16 kg)	951	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of juices and aromatized beverages; very easy processing, low warpage, contains a slip agent (UV sensitive).
HD5218EA	18 (190°C/2.16 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	Caps & closures, aerosol caps, pails, houseware.
HD5218EA-Y	18 (190°C/2.16 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	Continuous or staple fibres; non-woven (mainly medical & hygienic use).
HD5226EA	26 (190°C/2.16 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	Houseware, caps & closures, over caps.
HD5226EA-M	26 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and caps & closures intended for the primary packaging of medical and pharmaceutical applications.
HD5226EA-Y	26 (190°C/2.16 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	Continuous or staple fibres ; non-woven (mainly medical & hygienic use).
HD5240GA-B	4 (190°C/2.16 kg)	950	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps & closures for the packaging of juices and slightly carbonated or pressurized aromatized beverages ; easy processing, low warpage, contains a slip agent (UV sensitive).
HD5450UA	4.7 (190°C/2.16 kg)	953.5	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5450UA has been specially developed for injection moulding of heavy duty articles for outdoor use. Large dustbins and pails, pallet boxes, technical parts,...
HD5502S	0.2 (190°C/2.16 kg)	954	(N/A)	TDS	SSS	SDS	CONTACT >	General purpose grade with exceptional levels of impact performance.
HD5760UA	5.5 (190°C/2.16 kg)	957	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5760UA has been specially developed for injection moulding of heavy duty articles for outdoor use.
HD5802BM	0.3 (190°C/2.16 kg)	958	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5802BM is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.
HD5802BM-R	0.3 (190°C/2.16 kg)	956.5	(N/A)	TDS	SSS	SDS	CONTACT >	RIGIDEX® HD5802BM-R is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.
HD6007S	0.6 (190°C/2.16 kg)	962	(N/A)	TDS	SSS	SDS	CONTACT >	High rigidity polyethylene grade for fresh milk and non-aggressive chemicals.
HD6070EA	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	Caps & closures, over caps, cartridges, crates, pallets, pails.
HD6070EA-B	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for caps anc closures with direct beverage contact for still mineral water, aromatized water and juices; easy processing, slip agent free.
HD6070FA	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	High-density polyethylene grade with a very low gel level. Used in blends for food packaging to increase water vapour barrier properties, temperature, oil and fat resistance. When used in blends provides increased stiffness, higher gloss and reduced tendency to.
HD6070UA	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	Crates, pallets, pails, seats.
HM4560UA	6 (190°C/21.6 kg)	949	(N/A)	TDS	SSS	SDS	CONTACT >	Exceptional levels of impact and environmental stress crack resistance + UV stability ideal for IBC and large tank production.
HM5060XA	6 (190°C/21.6 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Very high levels of impact and environmental stress crack resistance specifically tailored for 25L container production.
HM5411EA	10 (190°C/21.6 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	General purpose grade with high impact and environmental stress crack resistance ideal for 1-25L containers.
HM5420XPH	2.1 (190°C/21.6 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	RIGIDEX® HM5420XPH is a high molecular weight grade with enhanced impact strength, supplied as a specially stabilised pellet for use in large blow moulding.
K38-20	0.85 (190°C/5 kg)	938	(N/A)	TDS	SSS	SDS	CONTACT >	Natural grade; non-pressure pipes, conduits, ducting. It is also suitable for blown film extrusion.
K38-20/40	0.9 (190°C/5 kg)	943.5	(N/A)	TDS	(N/A)	SDS	CONTACT >	Blue stripe for TUB171 and PC002-50R102, water.
K46-06-185	4.2 (190°C/21.6 kg)	946	(N/A)	TDS	SSS	SDS	CONTACT >	All types of automotive fuel tanks.
LGB163N2045	0.4 (190°C/2.16 kg)	990	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for blow moulding of bottles, suitable for the packaging of UHT milk.
LGB263N2070	0.7 (190°C/2.16 kg)	990	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE resin used for high-speed blow moulding of bottles, suitable for the packaging of UHT milk.
LRB711	1.5 (190°C/21.6 kg)	995	(N/A)	TDS	(N/A)	SDS	CONTACT >	Filler pipes and other parts requiring conductive properties.
MMPE0950/30	(N/A)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Anti-acid used for 6-layers bottle.
MMPE3940/10	(N/A)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Carbon black concentrate for the pigmentation of the middle black layer of co-extruded bottle.
MMPE3940/10FDA	(N/A)	(N/A)	(N/A)	TDS	(N/A)	SDS	CONTACT >	Carbon black concentrate for the pigmentation of the middle black layer of co-extruded bottle. Compliant to FDA.
PC002-50R968	0.85 (190°C/5 kg)	943	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for drinking water transport.
TUB120NRG	0.3 (190°C/5 kg)	949	1100	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure and non-pressure natural pipes with high stress-cracking resistance.
TUB121	0.45 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure fittings for gas and drinking water transport.
TUB121N3000	0.3 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for gas and drinking water transport, very large diameter pipes.
TUB121N6000	0.3 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure pipes and fittings for gas and drinking water transport.
TUB121N9000	0.24 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure pipes and fittings for gas and drinking water transport including very large diameter pipes.
TUB121NRG	0.24 (190°C/5 kg)	959	1100	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure and non-pressure pipes with increased stress-cracking resistance and improved thermo-oxidative ageing resistance.
TUB123N6000	0.33 (190°C/5 kg)	980	(N/A)	TDS	(N/A)	SDS	CONTACT >	White compound for pipe coating.
TUB124N2025	0.32 (190°C/5 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for drinking water transport.
TUB124N6000	0.3 (190°C/5 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for drinking water transport.
TUB125N2025	0.3 (190°C/5 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for gas transport.
TUB125N6000	0.3 (190°C/5 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for gas transport.
TUB131N2010	0.46 (190°C/5 kg)	954	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for gas and drinking water transport.
TUB171	0.85 (190°C/5 kg)	949	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for gas and drinking water transport.
TUB172	0.85 (190°C/5 kg)	938	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE80; pressure pipes for gas transport.

HDPE Eltex Superstress

MaterialHDPE
BrandEltex Superstress
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
CAP311	4 (190°C/2.16 kg)	960	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of still mineral water, juices and slightly carbonated or pressurized beverages ; very good processability, high rigidity, good ESCR, slip agent free.
CAP311S1	4 (190°C/2.16 kg)	960	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of aromatized waters, juices and slightly carbonated or pressurized beverages ; very good processability, high rigidity, good ESCR, contains a slip agent (UV sensitive).
CAP504HR	0.6 (190°C/2.16 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high rigidity, high ESCR, good processability, slip agent free.
CAP504HRS2	0.6 (190°C/2.16 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of carbonated soft drinks, especially in reduced weight cap designs ; high rigidity, high ESCR, good processability, contains a slip agent (UV sensitive).
CAP504HRS3	0.6 (190°C/2.16 kg)	958	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high rigidity, high ESCR, good processability, contains a slip agent.
CAP508	1.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high ESCR, very good processability, slip agent free.
CAP508S2	1.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of carbonated soft drinks, especially in reduced weight cap designs ; high ESCR, very good processability, contains a slip agent (UV sensitive).
CAP508S3	1.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; high ESCR, very good processability, contains a slip agent.
CAP602	0.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of sparkling water and carbonated soft drinks, especially in reduced weight cap designs ; very high ESCR, high impact strength, slip agent free.
CAP602S2	0.8 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE grade for Caps & Closures for the packaging of carbonated soft drinks, especially in reduced weight cap designs ; very high ESCR, high impact strength, contains a slip agent (UV sensitive).
TUB121N6000	0.3 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure pipes and fittings for gas and drinking water transport.
TUB121N9000	0.24 (190°C/5 kg)	959	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure pipes and fittings for gas and drinking water transport including very large diameter pipes.
TUB124N6000	0.3 (190°C/5 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for drinking water transport.
TUB125N6000	0.3 (190°C/5 kg)	952	(N/A)	TDS	(N/A)	SDS	CONTACT >	PE100; pressure pipes for gas transport.

HDPE Rigidex

MaterialHDPE
BrandRigidex
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
E5018	0.9 (190°C/5 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE grade for non-pressure pipe extrusion.
E5315	0.6 (190°C/5 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE grade for non-pressure pipe extrusion.
HD3575UA	7.5 (190°C/2.16 kg)	935	(N/A)	TDS	SSS	SDS	CONTACT >	Linear medium density polyethylene grade, supplied in pellet form for use in rotational moulding.
HD4820EA	2.5 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Specially formulated grade for exceptional levels of gloss.
HD5050EA	4 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	HDPE grade for caps & closures, crates, pails, houseware.
HD5050UA	4 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Dustbins, pallets, crates.
HD5060UA	5.5 (190°C/2.16 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5060UA is a linear copolymer polyethylene grade supplied in pellet form for injection moulding application.
HD5211EA	11 (190°C/2.16 kg)	951	(N/A)	TDS	SSS	SDS	CONTACT >	Pails, houseware, cartridges, toys, caps & closures, over caps.
HD5211EA-Y	11 (190°C/2.16 kg)	951	(N/A)	TDS	SSS	SDS	CONTACT >	Continuous or staple fibres ; non-woven (mainly medical & hygienic use).
HD5218EA	18 (190°C/2.16 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	Caps & closures, aerosol caps, pails, houseware.
HD5218EA-Y	18 (190°C/2.16 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	Continuous or staple fibres; non-woven (mainly medical & hygienic use).
HD5226EA	26 (190°C/2.16 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	Houseware, caps & closures, over caps.
HD5226EA-Y	26 (190°C/2.16 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	Continuous or staple fibres ; non-woven (mainly medical & hygienic use).
HD5450UA	4.7 (190°C/2.16 kg)	953.5	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5450UA has been specially developed for injection moulding of heavy duty articles for outdoor use. Large dustbins and pails, pallet boxes, technical parts,...
HD5502S	0.2 (190°C/2.16 kg)	954	(N/A)	TDS	SSS	SDS	CONTACT >	General purpose grade with exceptional levels of impact performance.
HD5760UA	5.5 (190°C/2.16 kg)	957	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5760UA has been specially developed for injection moulding of heavy duty articles for outdoor use.
HD5802BM	0.3 (190°C/2.16 kg)	958	(N/A)	TDS	SSS	SDS	CONTACT >	Rigidex® HD5802BM is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.
HD5802BM-R	0.3 (190°C/2.16 kg)	956.5	(N/A)	TDS	SSS	SDS	CONTACT >	RIGIDEX® HD5802BM-R is ideal for use in a wide range of blow moulding applications. The grade is particularly well suited to chemical and detergent packaging as the exceptional ESCR can allow for significant bottle weight reduction.
HD6007S	0.6 (190°C/2.16 kg)	962	(N/A)	TDS	SSS	SDS	CONTACT >	High rigidity polyethylene grade for fresh milk and non-aggressive chemicals.
HD6070EA	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	Caps & closures, over caps, cartridges, crates, pallets, pails.
HD6070FA	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	High-density polyethylene grade with a very low gel level. Used in blends for food packaging to increase water vapour barrier properties, temperature, oil and fat resistance. When used in blends provides increased stiffness, higher gloss and reduced tendency to.
HD6070UA	7.6 (190°C/2.16 kg)	960	(N/A)	TDS	SSS	SDS	CONTACT >	Crates, pallets, pails, seats.
HM4560UA	6 (190°C/21.6 kg)	949	(N/A)	TDS	SSS	SDS	CONTACT >	Exceptional levels of impact and environmental stress crack resistance + UV stability ideal for IBC and large tank production.
HM5060XA	6 (190°C/21.6 kg)	950	(N/A)	TDS	SSS	SDS	CONTACT >	Very high levels of impact and environmental stress crack resistance specifically tailored for 25L container production.
HM5411EA	10 (190°C/21.6 kg)	952	(N/A)	TDS	SSS	SDS	CONTACT >	General purpose grade with high impact and environmental stress crack resistance ideal for 1-25L containers.
HM5420XPH	2.1 (190°C/21.6 kg)	953	(N/A)	TDS	SSS	SDS	CONTACT >	RIGIDEX® HM5420XPH is a high molecular weight grade with enhanced impact strength, supplied as a specially stabilised pellet for use in large blow moulding.
K38-20	0.85 (190°C/5 kg)	938	(N/A)	TDS	SSS	SDS	CONTACT >	Natural grade; non-pressure pipes, conduits, ducting. It is also suitable for blown film extrusion.

HDPE Eltex MED

MaterialHDPE
BrandEltex MED
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
HD5226EA-M	26 (190°C/2.16 kg)	953	(N/A)	TDS	(N/A)	SDS	CONTACT >	HDPE copolymer especially recommended for manufacturing syringe components by injection moulding. It can also be used for manufacturing thin-walled containers and caps & closures intended for the primary packaging of medical and pharmaceutical applications.

HDPE Eltex TUB

MaterialHDPE
BrandEltex TUB
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
TUB120NRG	0.3 (190°C/5 kg)	949	1100	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure and non-pressure natural pipes with high stress-cracking resistance.
TUB121NRG	0.24 (190°C/5 kg)	959	1100	TDS	(N/A)	SDS	CONTACT >	PE100-RC; pressure and non-pressure pipes with increased stress-cracking resistance and improved thermo-oxidative ageing resistance.

HEAT SEAL Eltex P

MaterialHEAT SEAL
BrandEltex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
KS350	5 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer with slip and anti-blocking.
KS350 HP	6 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	ELTEX® P KS350 HP offers a very low heat sealing temperature and contains anti-block and slip additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines.
KS351	7.3 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer with slip and anti-blocking.
KS357	5 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer for metallisable film.
KS357 HP	6 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	ELTEX® P KS357 HP offers a very low heat sealing temperature and contains no technical additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines.
KS359	5 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer without technical additives.
KS359 HP	6 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	ELTEX® P KS359 HP offers a very low heat sealing temperature and contains no technical additives. Its fine-tuned rheology offers excellent processability on high speed BOPP conversion lines.
KS383 HP	6 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer with anti-blocking, recommended for high speed BOPP lines.
KS384	5 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer with anti-blocking.
KS385	5 (230°C/2.16 kg)	(N/A)	620	TDS	(N/A)	SDS	CONTACT >	BOPP Film 105°C SIT terpolymer with anti-blocking.
KS399	5 (230°C/2.16 kg)	(N/A)	500	TDS	(N/A)	SDS	CONTACT >	BOPP Film 90°C SIT butene copolymer without technical additives.
KS400	5 (230°C/2.16 kg)	(N/A)	700	TDS	(N/A)	SDS	CONTACT >	BOPP Film 115°C SIT high C2 copolymer with slip and anti-blocking.
KS407	5 (230°C/2.16 kg)	(N/A)	700	TDS	(N/A)	SDS	CONTACT >	BOPP Film 115°C SIT high C2 copolymer for metallisable film.
KS407HP	5 (230°C/2.16 kg)	(N/A)	720	TDS	(N/A)	SDS	CONTACT >	Modified random copolymer with a high ethylene content, developed for use primarily as the sealing layer in "coextruded bioriented metallisable film".
KS409	5 (230°C/2.16 kg)	(N/A)	700	TDS	(N/A)	SDS	CONTACT >	BOPP Film 115°C SIT high C2 copolymer without technical additives.
KS414	7.3 (230°C/2.16 kg)	(N/A)	750	TDS	(N/A)	SDS	CONTACT >	BOPP Film 115°C SIT high C2 copolymer with slip and anti-blocking - narrow MWD.
KS417	7 (230°C/2.16 kg)	(N/A)	720	TDS	(N/A)	SDS	CONTACT >	BOPP Film 115°C SIT high C2 copolymer - especially designed for metallisable film applications.
KS607	5 (230°C/2.16 kg)	(N/A)	850	TDS	(N/A)	SDS	CONTACT >	BOPP film butene copolymer for high barrier metallisable film.
KS689	5 (230°C/2.16 kg)	(N/A)	350	TDS	(N/A)	SDS	CONTACT >	Propylene/alpha-olefin copolymer specially developed for the sealing layers of “coextruded bi-oriented film” for food and technical packaging.
KV353	9 (230°C/2.16 kg)	(N/A)	650	TDS	(N/A)	SDS	CONTACT >	ELTEX® P KV353 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for food and technical packaging. It contains anti-blocking additive only.
KV389	9 (230°C/2.16 kg)	(N/A)	500	TDS	(N/A)	SDS	CONTACT >	ELTEX® P KV389 is a terpolymer specially developed for the sealing layers of blown multilayer BOPP film for low sealing performance and lamination. ELTEX® P KV389 is specially designed for the so-called “double bubble process”. It contains no technical additives.

HPP

MaterialHPP
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
100-CA25	25 (230°C/2.16 kg)	(N/A)	1600	TDS	SSS	SDS	CONTACT >	Consumer products, transparent containers, syringes.
100-CA50	50 (230°C/2.16 kg)	(N/A)	1550	TDS	SSS	SDS	CONTACT >	Thin walled containers for dairy and fresh food, media packaging.
100-CA50S	50 (230°C/2.16 kg)	(N/A)	1550	TDS	SSS	SDS	CONTACT >	Thin walled containers for dairy and fresh food, media packaging.
100-CB25	25 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	Media packaging, technical moulding, fast cycling.
100-CC60	60 (230°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	100-CC60 is a high fluidity clarified homopolymer with antistatic properties designed for injection moulding. The grade has been designed with a very high rigidity and excellent clarity even when processing the material at low temperatures.
100-GA01	0.9 (230°C/2.16 kg)	(N/A)	1550	TDS	SSS	SDS	CONTACT >	Sheets, blow moulding, strapping. Good rigidity, high heat resistance.
100-GA02	2 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	HPP for trays, containers; good rigidity, high heat resistance,food containers, technical mouldings, strapping, tapes, ropes.
100-GA03	3 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	Trays and containers for food products, tapes. Good rigidity, high heat resistance.
100-GA03S	3 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	Trays and containers for food products, tapes. Good rigidity, high heat resistance.
100-GA04	4 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	Trays and containers for food products, tapes. Good rigidity, high heat resistance.
100-GA09	9 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	General purpose injection moulding, standard cast film.
100-GA12	12 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo.
100-GA12S	12 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	Homopolymer for standard cast film, general purpose injection moulding, Caps & Closures Non Organo.
100-GA35	35 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	Injection moulding master-batches & compounds applications.
100-GB06	6 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	HPP for trays, caps & closures, containers. Good rigidity, high heat resistance.
100-GB25	25 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	Thin wall parts, garden furniture.
100-GB25S	25 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	100-GB25S is intended for injection moulding applications. It is particularly recommended for high speed moulding in multi-cavity tooling.
100-GD02	2 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	BOPP Film. Metallisation.
100-GD03	3 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	BOPP Film. Metallisation.
100-HR25	25 (230°C/2.16 kg)	(N/A)	1800	TDS	SSS	SDS	CONTACT >	High stiffness for appliances, technical moulding and food packaging.
100-MG03	3 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications.
100-MG12	12 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications.
100-MG25	25 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications.
100-NB03	3 (230°C/2.16 kg)	(N/A)	1800	TDS	SSS	SDS	CONTACT >	Transparent trays and containers for food products. High stiffness, very good optics. No anti-static agent.
100-NB03S	3 (230°C/2.16 kg)	(N/A)	1800	TDS	SSS	SDS	CONTACT >	Transparent trays and containers for food products. High stiffness, very good optics. No anti-static agent.
100-XZ12	12 (230°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	Long spin fine denier staple fibres for high speed nonwoven thermobonding lines.
101-CA06	6 (230°C/2.16 kg)	(N/A)	1750	TDS	SSS	SDS	CONTACT >	Trays and containers for food products. Good rigidity, high heat resistance, good transparency.
101-GB08	8 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	BOPP Film. Double bubble process.
101-SA09	9 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	Homopolymer PP for standard cast film, general purpose injection moulding, Caps & Closures Non Organo. With slip agent.
101-XA12	12 (230°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	Staple fibres for carpet face yarn, continuous filament for straps & belts.
101-XA25	25 (230°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	Bulk Continuous Filament for carpet face yarn, Fine denier staple fibres.
101-ZB25	25 (230°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	Industrial Spunbond Nonwovens. Suitable for high speed spinning processes.
102-CA03	3 (230°C/2.16 kg)	(N/A)	1800	TDS	SSS	SDS	CONTACT >	Transparent trays and containers for food products. High stiffness, very good optics and easy de-nesting.
102-CA03S	3 (230°C/2.16 kg)	(N/A)	1800	TDS	SSS	SDS	CONTACT >	Transparent trays and containers for food products. High stiffness, very good optics and easy de-nesting.
102-GD08	8 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	BOPP Film. Double bubble process, metallisation.
102-GF02	2 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	BOPP Film. Improved stretchability.
102-XA04	4 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	102-XA04 is a polypropylene homopolymer grade used for the production of high tenacity staple fibres.
102-XA06	6 (230°C/2.16 kg)	(N/A)	(N/A)	TDS	SSS	SDS	CONTACT >	High tenacity staple fibres for needlepunched nonwovens (geotextiles).
103-CA03S	3 (230°C/2.16 kg)	(N/A)	1900	TDS	SSS	SDS	CONTACT >	Sheet extrusion and thermoforming applications.
150-GA02	2 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	Trays and containers for food products, strapping, tapes, ropes. Good rigidity, high heat resistance.
150-GA03	3 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	Thermoforming, tapes, carpet backing and geotextile. Good rigidity, high heat resistance.
151-GA02	2 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	Homopolymer polypropylene intended for sheets extrusion applications requiring a good melt strength and a good processability.
180-HR25	25 (230°C/2.16 kg)	(N/A)	1800	TDS	SSS	SDS	CONTACT >	Homopolymer with high stiffness for appliances, technical moulding and food packaging, manufactured with a non phthalate based catalyst.
194-NA25	25 (230°C/2.16 kg)	(N/A)	1750	TDS	SSS	SDS	CONTACT >	Transparent containers.
HCS586	7 (230°C/2.16 kg)	(N/A)	2200	TDS	SSS	SDS	CONTACT >	Nucleated polypropylene homopolymer designed for cast film applications requiring: remarkably high stiffness, good optical properties, outstanding temperature resistance.
HCW280	20 (230°C/2.16 kg)	(N/A)	2200	TDS	SSS	SDS	CONTACT >	Ultra high stiffness for appliances, technical moulding and food packaging.

HPP Eltex

MaterialHPP
BrandEltex
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
100-CA50	50 (230°C/2.16 kg)	(N/A)	1550	TDS	SSS	SDS	CONTACT >	Thin walled containers for dairy and fresh food, media packaging.
100-CA50S	50 (230°C/2.16 kg)	(N/A)	1550	TDS	SSS	SDS	CONTACT >	Thin walled containers for dairy and fresh food, media packaging.

HPP Eltex MED

MaterialHPP
BrandEltex MED
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
100-MG03	3 (230°C/2.16 kg)	(N/A)	1450	TDS	SSS	SDS	CONTACT >	PP homopolymer for inhaler components and primary rigid packaging of medical and pharmaceutical applications.
100-MG12	12 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	PP homopolymer for caps & closures intended for the primary packaging of medical and pharmaceutical applications.
100-MG25	25 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	PP homopolymer for syringe and metered-dose inhaler components, caps & closures, thin wall containers as well as tubes, intended for the primary packaging of medical and pharmaceutical applications.

HPP Eltex P

MaterialHPP
BrandEltex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
HCS586	7 (230°C/2.16 kg)	(N/A)	2200	TDS	SSS	SDS	CONTACT >	Nucleated polypropylene homopolymer designed for cast film applications requiring: remarkably high stiffness, good optical properties, outstanding temperature resistance.
HCW280	20 (230°C/2.16 kg)	(N/A)	2200	TDS	SSS	SDS	CONTACT >	Ultra high stiffness for appliances, technical moulding and food packaging.

HPP Powder Eltex P

MaterialHPP Powder
BrandEltex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
HL001PF	2.15 (230°C/2.16 kg)	(N/A)	1600	TDS	SSS	SDS	CONTACT >	(N/A)
HV001PF	10 (230°C/2.16 kg)	(N/A)	1600	TDS	SSS	SDS	CONTACT >	(N/A)
HW001P	25 (230°C/2.16 kg)	(N/A)	1650	TDS	SSS	SDS	CONTACT >	Master batches. Compounds for fibres.
HY001P	45 (230°C/2.16 kg)	(N/A)	1700	TDS	SSS	SDS	CONTACT >	(N/A)

ICP

MaterialICP
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
300-CA06	6 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	Toys, housewares, pails, appliances.
350-HM00	0.3 (230°C/2.16 kg)	(N/A)	1850	TDS	SSS	SDS	CONTACT >	Impact copolymer for non-pressure pipes, blow-moulding and sheet extrusion applications.
350-HP45	45 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	High flow, high rigidity, nucleated and antistatic impact copolymer specifically designed for fast cycling, thin walled injection moulding applications.
400-CA25	25 (230°C/2.16 kg)	(N/A)	1550	TDS	SSS	SDS	CONTACT >	Crates & boxes, pails, containers, housewares, toys.
400-CB08	8 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	Crates, trays and large pails, batteries.
400-GA03	2.5 (230°C/2.16 kg)	(N/A)	1250	TDS	SSS	SDS	CONTACT >	Impact copolymer for sheets, trays, containers, artificial grass, stationery/confectionery films. Good heat resistance, very high impact.
400-GA05	5 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	Impact copolymer for stationery/confectionery films, sheets, trays, containers. Good heat resistance, very high impact.
400-IM01	0.8 (230°C/2.16 kg)	(N/A)	1650	TDS	SSS	SDS	CONTACT >	Injection moulding (fittings, manholes), non-pressure pipes.
400-NA01	1.5 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact.
401-CA55	55 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	(N/A)
401-CB50	50 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	ICP for toys, punnets and trays, yellow fat containers, ice cream containers, housewares.
401-NA01	1.2 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	Synthetic cardboards, Sheets, trays, containers; good heat resistance, very high impact.
401-NA06	6 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	Impact copolymer nucleated for stationery films, sheets, trays, containers. Good heat resistance, very high impact.
402-CB12	12 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	ICP for pails, containers, crates, housewares, toys.
433-NA00	0.3 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	Sheets; non-pressure pipes; good heat resistance, very high impact.
450-HP60	60 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	(N/A)
451-HP40	40 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	ICP for housewares, pails, boxes.
480-HP90	90 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	Nucleated and antistatic high flow high impact copolymer manufactured with a non phthalate based catalystdesigned for very fast cycling, thin walled injection moulding applications.
500-GA20	20 (230°C/2.16 kg)	(N/A)	1000	TDS	SSS	SDS	CONTACT >	Toys, containers, car batteries, luggage - ultra high impact, improved stiffness.
500-NA01	1.5 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	(N/A)
540-NA13	13 (230°C/2.16 kg)	(N/A)	1150	TDS	SSS	SDS	CONTACT >	540-NA13 is a very high impact copolymer recommended for injection moulding of luggage, crates & boxes as well as for the production of compounds.
CAP986S	6 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	ICP for caps and closures for the packaging of carbonated soft drinks, manufactured with a non phthalate based catalyst.
RF180	0.8 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	Copolymer produced with a non-phthalate based catalyst with good heat resistance and very high impact. Used for synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films.

ICP Eltex TUB

MaterialICP
BrandEltex TUB
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
350-HM00	0.3 (230°C/2.16 kg)	(N/A)	1850	TDS	SSS	SDS	CONTACT >	Impact copolymer for non-pressure pipes, blow-moulding and sheet extrusion applications.
433-NA00	0.3 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	Sheets; non-pressure pipes; good heat resistance, very high impact.

ICP Rigidex P

MaterialICP
BrandRigidex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
350-HP45	45 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	High flow, high rigidity, nucleated and antistatic impact copolymer specifically designed for fast cycling, thin walled injection moulding applications.
450-HP60	60 (230°C/2.16 kg)	(N/A)	1400	TDS	SSS	SDS	CONTACT >	(N/A)
451-HP40	40 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	ICP for housewares, pails, boxes.
480-HP90	90 (230°C/2.16 kg)	(N/A)	1350	TDS	SSS	SDS	CONTACT >	Nucleated and antistatic high flow high impact copolymer manufactured with a non phthalate based catalystdesigned for very fast cycling, thin walled injection moulding applications.
CAP986S	6 (230°C/2.16 kg)	(N/A)	1500	TDS	SSS	SDS	CONTACT >	ICP for caps and closures for the packaging of carbonated soft drinks, manufactured with a non phthalate based catalyst.

ICP Eltex
- MaterialICP
- BrandEltex
- BusinessINEOS O & P Europe
- Grades
  Switch view:
  Technical Application
  
  GRADE MFR
  (g/10 min) DENSITY
  (kg/m³) FLEXURAL MODULUS
  (MPa) TECH
  DATA
  SHEET SSS SDS &
  REGULATORY CERTIFICATES CONTACT TYPICAL APPLICATIONS
  500-NA01 1.5
  (230°C/2.16 kg) (N/A) 1300 TDS SSS SDS CONTACT > (N/A)

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
500-NA01	1.5 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	(N/A)

ICP Eltex P

MaterialICP
BrandEltex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
RF180	0.8 (230°C/2.16 kg)	(N/A)	1300	TDS	SSS	SDS	CONTACT >	Copolymer produced with a non-phthalate based catalyst with good heat resistance and very high impact. Used for synthetic cardboard, sheets, trays and containers for food products, stand-up pouches and films.

Ionomer Eltex

MaterialIonomer
BrandEltex
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
I8H430Z	5.0 (190°C/2.16 kg)	935	(N/A)	TDS	(N/A)	SDS	CONTACT >	ELTEX® I8H430Z is a Low Density Polyethylene ionomer for blown or cast film and extrusion coating applications.

Ionomer

MaterialIonomer
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
I8H430Z	5.0 (190°C/2.16 kg)	935	(N/A)	TDS	(N/A)	SDS	CONTACT >	ELTEX® I8H430Z is a Low Density Polyethylene ionomer for blown or cast film and extrusion coating applications.
M21E730	0.5 (190°C/2.16 kg)	933	(N/A)	TDS	SSS	SDS	CONTACT >	Easy-tear applications.
M21G764	0.95 (190°C/2.16 kg)	926	(N/A)	TDS	SSS	SDS	CONTACT >	FFS thin bags; blending.

LDPE

MaterialLDPE
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
17L430	4 (190°C/2.16 kg)	918	220	TDS	SSS	SDS	CONTACT >	LDPE grade for extrusion coating at low line speed with an outstanding low Neck In, suitable also for dry-blending and coextrusion to increase the melt curtain stability.
17L430B	4 (190°C/2.16 kg)	918	220	TDS	SSS	SDS	CONTACT >	LDPE grade for extrusion coating at low line speed with an outstanding low Neck In, suitable also for dry-blending and coextrusion to increase the melt curtain stability.
18R430	15 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE Grade especially suitable for thin coatings, lower heat seal temperature and better wettability on substrates, general purpose injection moulding.
19N430	7.5 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE Grade for general coating applications with improved heat sealibity compared to 23L430, general purpose injection moulding.
19N430B	7.5 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE grade for general coating applications with improved heat sealability.
19N930	7.5 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE for injection moulding of thin walled containers and caps & closures.
20N430	8.5 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE Grade for higher line speeds, lower coating weights or lower melt temperatures, general purpose injection moulding.
20T930	20 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE for injection moulding of thin walled containers and caps & closures.
21D430	0.25 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Heavy duty film; shrinkhoods.
21H460	1.5 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	General purpose; shrink; foam.
22D730	0.3 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	Blown film for extra strong bags and shrink film.
22G564	1.2 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	Blown film for carrier bags.
22G764	1.2 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	Blown film for strong bags and shrink film.
22H594	2.1 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	(N/A)
23H430	2 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	General purpose; shrink; foam; blow moulding.
23L430	4.5 (190°C/2.16 kg)	924	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE Grade for general coating applications, general purpose injection moulding.
23L430B	4.5 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE Grade for general coating applications, general purpose injection moulding.
23T930	22 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	LDPE for injection moulding of thin walled containers and caps & closures.
24W930	55 (190°C/2.16 kg)	923	300	TDS	SSS	SDS	CONTACT >	LDPE for injection moulding of thin walled containers, caps & closures and for compounding.
BP28D780	0.25 (190°C/2.16 kg)	929	(N/A)	TDS	SSS	SDS	CONTACT >	Telecom insulation , LDPE insulation with high extrusion performance.
BPD2000	2 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Power medium voltage insulation , unstabilised clean LDPE for peroxide crosslinking (direct peroxide injection).
BPD2000E	2 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Power medium & high voltage insulation and applications requesting extra cleanliness , unstabilised very clean LDPE for peroxide crosslinking (direct peroxide injection).
BPD2008	0.8 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	BPD2008 is designed for use in medium/high voltage power cable insulation and applications requesting extra cleanliness using the direct peroxide injection (DPI) process. It is well defined for MDCV equipment thanks to its low sag properties.
BPD2070	0.25 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Power medium voltage insulation Unstabilised clean LDPE for silane crosslinking (Monosil®).
BPD2142	1 (190°C/2.16 kg)	930	(N/A)	TDS	SSS	SDS	CONTACT >	Power low voltage cable insulation Unstabilised LDPE (Monosil®, Sioplas®).
BPD2167	0.3 (190°C/2.16 kg)	930	(N/A)	TDS	SSS	SDS	CONTACT >	Power low voltage insulation Unstabilised LDPE for overhead cables application (Monosil®).
BPD8063	1.5 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Telecom insulation LDPE for low loss RF cable insulation.
BPD8128	0.27 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Power low voltage cable insulation Stabilised LDPE for copper conductor (Monosil ®).
PH19N630	7.5 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Additive free LDPE grade for pharmaceutical applications such as coating and injection of tubes, caps and closures.
PH22D630	0.3 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	Low density polyethylene for blow-fill-seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications.
PH23H630	2 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules) and films, intended for the primary packaging of medical and pharmaceutical applications.
PH23T630	22 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications.
PH27D630	0.3 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications.
PH30D630	0.3 (190°C/2.16 kg)	930	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications.

LDPE Eltex MED

MaterialLDPE
BrandEltex MED
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
PH19N630	7.5 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Additive free LDPE grade for pharmaceutical applications such as coating and injection of tubes, caps and closures.
PH22D630	0.3 (190°C/2.16 kg)	922	(N/A)	TDS	SSS	SDS	CONTACT >	Low density polyethylene for blow-fill-seal process (bottles & ampoules), films (bags & pouches) as well as flexible tubes, intended for the primary packaging of medical and pharmaceutical applications.
PH23H630	2 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules) and films, intended for the primary packaging of medical and pharmaceutical applications.
PH23T630	22 (190°C/2.16 kg)	923	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for injection moulding components (especially caps & closures) intended for the primary packaging of medical and pharmaceutical applications.
PH27D630	0.3 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for the primary packaging of medical and pharmaceutical applications.
PH30D630	0.3 (190°C/2.16 kg)	930	(N/A)	TDS	SSS	SDS	CONTACT >	Low Density Polyethylene for Blow-Fill-Seal process (bottles & ampoules), intended for primary packaging of medical and pharmaceutical applications.

LLDPE

MaterialLLDPE
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
BPD3642	3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Power low voltage insulation & jacketing Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications.
BPD3669	3.3 (190°C/2.16 kg)	926	(N/A)	TDS	SSS	SDS	CONTACT >	Power low voltage insulation & jacketing Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications.
LL2635UA	3.3 (190°C/2.16 kg)	926	500	TDS	SSS	SDS	CONTACT >	Rotomoulding application; various applications with high flexibility, very high impact strength.
LL6120AA	2.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Cast stretch film, artificial grass.
LL6130AA	3. (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Cast stretchwrap.
LL6208AF	0.9 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	For use in rich blends in heavy duty sacks, liners and other thin film applications; artificial grass.
LL6208LJ	0.9 (190°C/2.16 kg)	921	(N/A)	TDS	SSS	SDS	CONTACT >	For use in rich blends for heavy duty sacks, liners and other thin film applications requiring excellent mechanical and optical properties.
LL6430AA	3.2 (190°C/2.16 kg)	926	(N/A)	TDS	SSS	SDS	CONTACT >	Cast stretchwrap; anticling layer.
LL6608AF	0.9 (190°C/2.16 kg)	928	(N/A)	TDS	SSS	SDS	CONTACT >	Lean and rich blend blown film applications such as rigid layers in co-extrusion, carrier bags, refuse sacks and liners; artificial grass.
LL6608LJ	0.9 (190°C/2.16 kg)	929	(N/A)	TDS	SSS	SDS	CONTACT >	Mailing film; carrier, bread and produce bags.
LL6808AA	0.85 (190°C/2.16 kg)	932	(N/A)	TDS	SSS	SDS	CONTACT >	LL6808AA is a low-gel polymer designed for geomembranes and geoliners, blown film requiring improved stiffness and artificial grass.
LL6910AA	1.0 (190°C/2.16 kg)	936	(N/A)	TDS	SSS	SDS	CONTACT >	For use in lean and rich blend blown film applications such as overwrap, counter bags, shrink film and boil-in-the-bag applications; artificial grass.
LL6910KJ	1.0 (190°C/2.16 kg)	937	(N/A)	TDS	SSS	SDS	CONTACT >	Overwrap; nappy bags; lamination.
LL6910LA	1.0 (190°C/2.16 kg)	936	(N/A)	TDS	SSS	SDS	CONTACT >	LL6910LA is rigid blown film grade offering a certified low level of gels making it ideal for lamination or thin film applications with highly decorative printing.
LL6930AA	3.5 (190°C/2.16 kg)	936	(N/A)	TDS	SSS	SDS	CONTACT >	Cast stretchwrap; anticling layer.
LL8109AA	0.9 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	Mulch film; refuse sacks; liners; thin film applications.
LL8109KB	0.9 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Mulch film; refuse sacks; liners; thin film applications.

LLDPE Eltex

MaterialLLDPE
BrandEltex
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
LL2635UA	3.3 (190°C/2.16 kg)	926	500	TDS	SSS	SDS	CONTACT >	Rotomoulding application; various applications with high flexibility, very high impact strength.

MDPE

MaterialMDPE
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
BPD4020	0.2 (190°C/2.16 kg)	938	(N/A)	TDS	SSS	SDS	CONTACT >	Jacketing Stabilised MDPE jacket.
BPD4035	0.2 (190°C/2.16 kg)	949	(N/A)	TDS	SSS	SDS	CONTACT >	Jacketing MDPE black jacket compound.

mLLDPE

MaterialmLLDPE
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
BPD3801	5.5 (190°C/2.16 kg)	916	(N/A)	TDS	SSS	SDS	CONTACT >	Power low voltage insulation & jacketing Unstabilized C6-LLDPE with enhance properties for crosslinked LV insulation (Monosil®, Sioplas®) & base resin for high performance cable jacketing applications.
PF0101XA	1.3 (190°C/2.16 kg)	902	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® PF0101XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required.
PF0101XJ	1.3 (190°C/2.16 kg)	903	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® PF0101XJ has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required.
PF0601XA	1.3 (190°C/2.16 kg)	906	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF0601XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required.
PF1315AZ	15 (190°C/2.16 kg)	914	(N/A)	TDS	SSS	SDS	CONTACT >	C6 m-LLDPE for extrusion coating, injection moulding and compounding without any additive.
PF1320AZ	20 (190°C/2.16 kg)	913	(N/A)	TDS	SSS	SDS	CONTACT >	C6 m-LLDPE for extrusion coating, injection moulding and compounding without any additive.
PF6012AA	1.3 (190°C/2.16 kg)	912	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6012AA is particularly suitable for multilayer film applications where it can be used neat or as a blending partner with LLDPE or LDPE in sealing layers.
PF6012KJ	1.3 (190°C/2.16 kg)	913	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6012KJ has been developed for use in highly technical film like food packaging, lamination, and other thin film applications where superior mechanical and sealing performance is required.
PF6030XA	3.0 (190°C/2.16 kg)	912	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® PF6030XA is particularly suitable for high performance cast stretch film applications in co-extruded structures as well as for other advanced polyolefin films produced with cast extrusion process.
PF6112AA	1.3 (190°C/2.16 kg)	916	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6112AA has been developed for use in food packaging and other thin film applications where superior mechanical and optical performance is required.
PF6130AA	3.5 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	High performance cast stretch.
PF6130LA	3.5 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	High performance cast stretch film applications, in both monolayer and co-extruded structures. Designed for applications which require a very low level of gels. Can be used for the production of artificial grass monofilaments.
PF6140AA	4.5 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	High performance cast stretch film applications, in both monolayer and co-extruded structures.
PF6212AA	1.3 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; heavy duty sacks; thin film applications.
PF6212AE	1.3 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Food packaging and other thin film applications where excellent mechanical and optical performance is required.
PF6212KE	1.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Food packaging and other thin film applications where excellent mechanical and optical performance is required.
PF6212KJ	1.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; thin film applications.
PF6212LA	1.3 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	High quality lamination film.
PF6212LJ	1.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	High quality lamination film.
PF6220AA	2.1 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; thin film applications.
PF6220AE	2.1 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6220AE has been developed for use in food packaging and other thin film applications where excellent mechanical and optical performance is required. In addition, Eltex® PF6220AE offers easy extrudability.
PF6220KJ	2.1 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; thin film applications.
PF6612AA	1.3 (190°C/2.16 kg)	926	(N/A)	TDS	SSS	SDS	CONTACT >	Collation shrinkwrap; consumer packaging.
PF6612KE	1.3 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6612KE has been developed for use in collation shrinkwrap, food packaging, refuse sacks and other thin film applications where excellent balance between film strength and rigidity is required together with good optical properties.
PF6612KJ	1.3 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	Collation shrinkwrap; consumer packaging.
TUB220-RT	1.2 (190°C/2.16 kg)	937	(N/A)	TDS	SSS	SDS	CONTACT >	PE-RT type II natural polyethylene resin for hot & cold water applications such as floor & wall heating/cooling, plumbing, industrial pipes & fittings.

mLLDPE Eltex PF

MaterialmLLDPE
BrandEltex PF
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
PF0101XA	1.3 (190°C/2.16 kg)	902	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® PF0101XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required.
PF0101XJ	1.3 (190°C/2.16 kg)	903	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® PF0101XJ has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required.
PF0601XA	1.3 (190°C/2.16 kg)	906	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF0601XA has been developed for use in highly technical film like food packaging, lamination and co-extrusion applications where superior mechanical and sealing performance is required.
PF1315AZ	15 (190°C/2.16 kg)	914	(N/A)	TDS	SSS	SDS	CONTACT >	C6 m-LLDPE for extrusion coating, injection moulding and compounding without any additive.
PF1320AZ	20 (190°C/2.16 kg)	913	(N/A)	TDS	SSS	SDS	CONTACT >	C6 m-LLDPE for extrusion coating, injection moulding and compounding without any additive.
PF6012AA	1.3 (190°C/2.16 kg)	912	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6012AA is particularly suitable for multilayer film applications where it can be used neat or as a blending partner with LLDPE or LDPE in sealing layers.
PF6012KJ	1.3 (190°C/2.16 kg)	913	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6012KJ has been developed for use in highly technical film like food packaging, lamination, and other thin film applications where superior mechanical and sealing performance is required.
PF6030XA	3.0 (190°C/2.16 kg)	912	(N/A)	TDS	SSS	SDS	CONTACT >	ELTEX® PF6030XA is particularly suitable for high performance cast stretch film applications in co-extruded structures as well as for other advanced polyolefin films produced with cast extrusion process.
PF6112AA	1.3 (190°C/2.16 kg)	916	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6112AA has been developed for use in food packaging and other thin film applications where superior mechanical and optical performance is required.
PF6130AA	3.5 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	High performance cast stretch.
PF6130LA	3.5 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	High performance cast stretch film applications, in both monolayer and co-extruded structures. Designed for applications which require a very low level of gels. Can be used for the production of artificial grass monofilaments.
PF6140AA	4.5 (190°C/2.16 kg)	918	(N/A)	TDS	SSS	SDS	CONTACT >	High performance cast stretch film applications, in both monolayer and co-extruded structures.
PF6212AA	1.3 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; heavy duty sacks; thin film applications.
PF6212AE	1.3 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Food packaging and other thin film applications where excellent mechanical and optical performance is required.
PF6212KE	1.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Food packaging and other thin film applications where excellent mechanical and optical performance is required.
PF6212KJ	1.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; thin film applications.
PF6212LA	1.3 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	High quality lamination film.
PF6212LJ	1.3 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	High quality lamination film.
PF6220AA	2.1 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; thin film applications.
PF6220AE	2.1 (190°C/2.16 kg)	919	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6220AE has been developed for use in food packaging and other thin film applications where excellent mechanical and optical performance is required. In addition, Eltex® PF6220AE offers easy extrudability.
PF6220KJ	2.1 (190°C/2.16 kg)	920	(N/A)	TDS	SSS	SDS	CONTACT >	Consumer packaging; thin film applications.
PF6612AA	1.3 (190°C/2.16 kg)	926	(N/A)	TDS	SSS	SDS	CONTACT >	Collation shrinkwrap; consumer packaging.
PF6612KE	1.3 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	Eltex® PF6612KE has been developed for use in collation shrinkwrap, food packaging, refuse sacks and other thin film applications where excellent balance between film strength and rigidity is required together with good optical properties.
PF6612KJ	1.3 (190°C/2.16 kg)	927	(N/A)	TDS	SSS	SDS	CONTACT >	Collation shrinkwrap; consumer packaging.

mLLDPE Eltex TUB

MaterialmLLDPE
BrandEltex TUB
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
TUB220-RT	1.2 (190°C/2.16 kg)	937	(N/A)	TDS	SSS	SDS	CONTACT >	PE-RT type II natural polyethylene resin for hot & cold water applications such as floor & wall heating/cooling, plumbing, industrial pipes & fittings.

RCP

MaterialRCP
Brand
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
200-CA02	1.7 (230°C/2.16 kg)	(N/A)	1000	TDS	SSS	SDS	CONTACT >	Sheets, trays and containers for food products, blown film. Good heat resistance, excellent transparency.
200-CA13	13 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	200-CA13 is designed for transparent injection moulded houseware, closures and food packaging needing goodimpact strength and excellent organoleptic properties. 200-CA13 is also suitable for injection stretch blow moulding (ISBM).
200-CA25	25 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	200-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles. 200-CA25 has a property profile also suitable for injection stretch blow moulding (ISBM).
200-CA40	40 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	200-CA40 is a clarified random copolymer with a medium ethylene content for the fast production of clear thin-walled injection-moulded articles.
200-GA02	2 (230°C/2.16 kg)	(N/A)	950	TDS	SSS	SDS	CONTACT >	Sheets, trays and containers for food products. Good heat resistance, good transparency.
200-GA04	3.8 (230°C/2.16 kg)	(N/A)	950	TDS	SSS	SDS	CONTACT >	Sheets, trays and containers for food products. Good transparency, improved processability.
200-MG02	1.8 (230°C/2.16 kg)	(N/A)	900	TDS	(N/A)	SDS	CONTACT >	Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C.
200-NA02	2 (230°C/2.16 kg)	(N/A)	1000	TDS	SSS	SDS	CONTACT >	Sheets, trays and containers for food products. Good heat resistance, excellent transparency.
203-CA25	25 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	203-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles as transparent thin wall injection moulding, caps and closures, Housewares or clarified food containers.
203-NA02	1.9 (230°C/2.16 kg)	(N/A)	1150	TDS	SSS	SDS	CONTACT >	High heat resistance with good clarity makes it ideal for various hot fill bottle applications.
203-OR25	25 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	203-OR25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of clear articles. 203-OR25 presents itself with very low odour and smell.
205-CA25	25 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	205-CA25 is a clarified random copolymer with a medium ethylene content and good flow primarily intended for injection moulding of high transparency articles. 205-CA25 has a property profile also suitable for injection stretch blow moulding (ISBM).
205-CA40	40 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	205-CA40 is a clarified random copolymer with a medium ethylene content for the fast production of high transparency thin-walled injection-moulded articles.
240-CA12	13 (230°C/2.16 kg)	(N/A)	850	TDS	SSS	SDS	CONTACT >	RCP for transparent packaging requiring excellent impact.
240-HP25	25 (230°C/2.16 kg)	(N/A)	1200	TDS	SSS	SDS	CONTACT >	240-HP25 is a new generation clarified random copolymer especially intended for the injection moulding of articles with high transparency, excellent stiffness and impact strength balance and fast cycle. 240-HP25 has a property profile also suitable for injection stretch blow moulding (ISBM).
240-HP40	40 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	240-HP40 is a new generation clarified random copolymer especially intended for the injection moulding of articles with high transparency, excellent stiffness and impact strength balance and fast cycle. 240-HP40 has a property profile also suitable for injection stretch blow moulding (ISBM).
240-HP80	80 (230°C/2.16 kg)	(N/A)	1100	TDS	SSS	SDS	CONTACT >	240-HP80 is a very high flow new generation clarified random copolymer especially intended for the injection moulding of articles with high transparency, excellent stiffness and impact strength balance and fast cycle.
240-MS23	23 (230°C/2.16 kg)	(N/A)	980	TDS	SSS	SDS	CONTACT >	External barrel for disposable syringes (not pre-filled) / Transparent thin wall injection moulding.
240-NA02	1.5 (230°C/2.16 kg)	(N/A)	900	TDS	SSS	SDS	CONTACT >	Clarified grade offering outstanding clarity for the production of small to medium sized bottles.
242-NA02	1.8 (230°C/2.16 kg)	(N/A)	900	TDS	SSS	SDS	CONTACT >	Highly clarified random copolymer for extrusion blow moulding, sheet extrusion, clear thermoformed packaging and high clarity blown films. Its formulation allows use for multilayer as well as monolayer structures. It is also suitable for injection stretch blow moulding (ISBM).

RCP Eltex MED

MaterialRCP
BrandEltex MED
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
200-MG02	1.8 (230°C/2.16 kg)	(N/A)	900	TDS	(N/A)	SDS	CONTACT >	Medical and pharmaceutical applications : blow-fill-seal of bottles and ampoules, blow-moulding and injection - sterilisable at 121°C.
240-MS23	23 (230°C/2.16 kg)	(N/A)	980	TDS	SSS	SDS	CONTACT >	External barrel for disposable syringes (not pre-filled) / Transparent thin wall injection moulding.

RCP Powder Eltex P

MaterialRCP Powder
BrandEltex P
BusinessINEOS O & P Europe

Grades

Switch view:

Technical Application

GRADE	MFR (g/10 min)	DENSITY (kg/m³)	FLEXURAL MODULUS (MPa)	TECH DATA SHEET	SSS	SDS & REGULATORY CERTIFICATES	CONTACT	TYPICAL APPLICATIONS
KS001PF	4.5 (230°C/2.16 kg)	(N/A)	700	TDS	SSS	SDS	CONTACT >	High ethylene content random copolymer powder.