Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 65 Results
INEOS Styrolution
-
MaterialABSBrandLustran® StandardBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran 1146 (N/A) 96 (N/A) (N/A) 42 MORE INFO > (N/A) Lustran 1152 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 1152 resin is a very high-impact extrusion grade of ABS (acrylonitrile butadiene styrene) with a balance of properties not offered by other grades of ABS. It offers superior toughness, particularly for low-temperature applications, and good thermoformability. Lustran 138 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 138 is an intermediate-gloss, high-productivity, medium-impact grade of ABS (Acrylonitrile Butadiene Styrene). It offers a good balance of physical properties. Lustran ABS 138 resin is available in 903068 black. Lustran 248 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 248 resin is a high-gloss, medium-impact grade of ABS (Acrylonitrile Butadiene Styrene). This general-purpose injection molding grade offers a good balance of physical properties. Lustran 256 2200 97 14 12 45 MORE INFO > Lustran® 256 resin is a natural, medium-flow, medium-impact, low-gloss, low-gel extrusion grade of ABS (Acrylonitrile Butadiene Styrene). It is used for blending with other Lustran ABS virgin and regrind materials to optimize cost and performance. Lustran 261 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 261 resin is a natural, stiffer-flow, blending grade of ABS (acrylonitrile butadiene styrene). It is designed for use with other high-impact ABS resins for drain, waste, and vent (DWV) pipe and fittings. Lustran 288 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 288 is a very high-flow injection molding grade of ABS (acrylonitrile butadiene styrene) with good impact strength and high gloss. It is intended for use in a wide range of applications, particularly in thin-walled components for telecommunications, office equipment, consumer and other office products. Lustran 433 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 433 is a general-purpose injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It is a high impact, high-gloss ABS, available only in natural (NR)and black (BK904000). Lustran 448 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 448 resin is a high-gloss, high-impact injection molding grade of ABS (acrylonitrile butadiene styrene). In addition to a good balance of physical properties, it provides heat stability and very good moldability. Lustran 448 in Natural color (000000) is listed under NSF 51 for food equipment materials. Lustran 451 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 451 is a easy flowing, medium impact injection molding resin designed with a unique balance of impact, heat resistance, flow and gloss. Lustran 552 2000 96 6 32 40 MORE INFO > Lustran® 552 resin is a medium-gloss, medium-impact extrusion grade of ABS (acrylonitrile butadiene styrene). It provides a good balance between rigidity and impact strength, and has a stiff melt flow suitable for extrusion and thermoforming. Lustran 556 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 556 resin is a low-gloss, medium-impact extrusion grade of ABS (acrylonitrile butadiene styrene). It has good melt strength for extrusion and thermoforming, and can be easily coextruded. Lustran 620 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 620 is a high modulus, HFC 134a and HCFC 22 resistant extrusion grade resin designed for refrigerator door and food liners. It offers good melt strength and deep draw formability for superiormaterial distribution in large complex parts. Lustran 633 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 633 is a general-purpose injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It offers a good balance of physical properties, high gloss, and good moldability. Lustran 720 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 720 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene). Designed for molded drain, waste, and vent (DWV) fittings, it meets or exceeds ASTM D 3965 3-2-2-2-2 cell class requirements for ASTM F 628 and D 2661. It is also listed under NSF Standard 14 and CSA Standard B181.1. Lustran 732 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 732 is an extrusion grade resin designed for use in thermoformed refrigerator and freezer liner applications. It is suitable for use with 245fa PU foams. Lustran 750 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 750 resin is a black, virgin injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It is designed for molded drain, waste, and vent (DWV) fittings. It resin meets or exceeds ASTM D 3965 3-2-2- 2-2 cell class requirements for ASTM F 628 and D 2661. It is also listed under NSF Standard 14. Lustran 752 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 752 resin is a high-gloss, high-impact extrusion grade of ABS (Acrylonitrile Butadiene Styrene) with improved depth of image and gloss in extruded sheet and thermoformed parts. It provides a superior balance between rigidity and impact strength, as well as excellent melt strength for good thermoformability. Lustran 754 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 754 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene). Designed for molded drain, waste, and vent (DWV) fittings, it meets or exceeds ASTM D 3965 3-2-2-2-2 cell class requirements for ASTM F 628 and D 2661. It is also listed under NSF Standard 14 and CSA Standard B181.1. Lustran E112LG 1600 95 7 11 28 MORE INFO > Lustran® E112LG resin is a low-gloss, medium-impact extrusion grade of ABS (acrylonitrile butadiene styrene). It has good melt strength for extrusion and thermoforming, and can be easily coextruded. It is easy to color with ABS color concentrates. Lustran LK197 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > (N/A) -
MaterialABSBrandLustran® SpecialtiesBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran 248FC (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 248FC resin is a high-gloss, medium-impact grade of ABS (acrylonitrile butadiene styrene). Lustran 348 2600 (N/A) 19 14 52 MORE INFO > Lustran® 348 resin is an injection molding grade of ABS (Acrylonitrile butadiene styrene) with medium impact strength and good tensile properties. It is especially suitable for medical applications Lustran 349 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® 349 is a high-gloss, medium-impact injection molding resin that has been specially formulated for excellent surface lubricity using internal additives. Lustran 446 (N/A) 97 13 (N/A) 44 MORE INFO > Lustran® 446 resin is a high-impact grade of ABS (Acrylonitrile Butadiene Styrene). This automotive injection molding grade provides a good balance of mechanical properties and impact strength for substrate applications. Lustran LGA (N/A) 95 (N/A) 16 40 MORE INFO > Lustran® LGA resin is a low-gloss grade of ABS (acrylonitrile butadiene styrene). This automotive injection molding grade offers an excellent balance of rigidity, impact strength, and abuse resistance. Lustran LGM (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Lustran® LGM is a low-gloss, easy-flow grade of ABS (Acrylonitrile Butadiene Styrene). This general-purpose injection molding grade offers an excellent balance of rigidity, impact strength, and abuse resistance. Lustran PG298 (N/A) 98 (N/A) 22 50 MORE INFO > Lustran® PG298 resin is a grade of ABS (acrylonitrile butadiene styrene) for use in automotive and general-purpose applications. It provides a unique combination of flow and rigidity, with increased scratch resistance. -
MaterialABSBrandLustran® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Lustran Elite 1827 2300 103 (N/A) 17 45 MORE INFO > Lustran® Elite 1827 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene) for high-heat applications in the automotive market. It provides high heat resistance, low gloss, toughness, and easy flow for processing molded-in color parts. Lustran Elite 1891 (N/A) 105 (N/A) 17 45 MORE INFO > Lustran® Elite 1891 resin is an injection molding grade of ABS (acrylonitrile butadiene styrene) for high-heat applications in the automotive market. It provides high heat resistance, low gloss, toughness, and easy flow for processing molded-in color parts. -
MaterialABSBrandNovodur®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Novodur E401 1900 99 5 32 40 MORE INFO > Novodur® E401 is a high impact extrusion grade with good surface appearance Novodur HD 15 2300 100 15 14 48 MORE INFO > Novodur® HD 15 is an easily processable ABS grade with well-balanced mechanical properties and an exellent chemical and stress cracking resistance Novodur HD M203FC 2400 99 31 16 46 MORE INFO > Novodur® HD M203FC is an injection molding grade especially suitable for medical applications providing high flowability. Novodur HD M203FC G3 5600 105 16 5 70 MORE INFO > Novodur® HD M203FC G3 is a glass fiber reinforced injection molding ABS grade for medical applications. Novodur M210TF 2450 99 32 16 46 MORE INFO > Novodur® M210TF is medium impact, high gloss injection molding grade designed for toy application. M210TF is in compliance with food contact regulations Novodur P2H-AT 2500 98 37 18 44 MORE INFO > Novodur® P2H-AT is a general purpose injection molding grade providing high flowability and contains an antistatic additive. Novodur P2HGV 5500 105 3 6 (N/A) MORE INFO > Novodur® P2HGV is a 16.5% glass fiber reinforced injection molding grade which provides high rigidity and enhanced heat resistance. Novodur P2M-AT 2300 98 20 22 39 MORE INFO > Novodur® P2M-AT is a medium impact, high gloss injection molding grade with good flowability and contains an antistatic additive. Novodur P2MC 2200 96 25 25 40 MORE INFO > Novodur® P2MC is an injection molding grade especially suitable for electroplating, providing high flowability. Novodur P3H-AT 2500 98 13 20 48 MORE INFO > Novodur® P3H-AT is a general purpose injection molding grade with enhanced chemical resistance and contains an antistatic additive. NOVODUR P4XF 2400 96 60 14 43 MORE INFO > P4XF is an ABS with very high flowability and at the same time offers an attractive profile of impact and heat resistance. Novodur SBM-90 2000 90 13 15 40 MORE INFO > Novodur SBM-90 is especially designed for drinking water contact, food contact and other sensitive applications. -
MaterialABSBrandNovodur® High HeatBusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Novodur H604 2400 102 10 21 45 MORE INFO > Novodur® H604 is a high heat injection molding grade with enhanced chemical resistance, especially suitable for being painted. Novodur H605 2400 102 26 15 47 MORE INFO > Novodur® H605 is a high heat injection molding grade with enhanced flowability and low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs.Furthermore, it complies with EU food contact requirements. Novodur H701 2100 105 8 22 41 MORE INFO > Novodur® H701 is an ABS injection molding grade with a good balance of heat resistance, impact strength and flowability. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs. Novodur H702 2500 104 14 19 46 MORE INFO > Novodur® H702 is a high heat, high gloss injection molding grade with very good flowability Novodur H801 2400 106 10.5 35 49 MORE INFO > Novodur® H801 is a PC modified high heat injection molding grade with excellent flowability and high impact strength. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs. Novodur H802 2700 108 9.5 18 51 MORE INFO > Novodur® H802 is a high heat injection molding grade with high stiffness, especially suitable for being painted. Novodur H950 2600 114 4.5 17 50 MORE INFO > Novodur® H950 is a very high heat injection molding grade with high gloss surface appearance Novodur HH-106 2400 106 7 16 51 MORE INFO > Novodur® HH-106 is a high heat injection molding grade providing a balanced property profile. Novodur HH-106 G1 3000 107 5 12 51 MORE INFO > Novodur® HH-106 G1 is a 4% glass fiber reinforced ABS for injection moulding with enhanced heat resistance. Novodur HH-106 G2 3600 107 4 6 58 MORE INFO > Novodur® HH-106 G2 is a 8% glass fiber reinforced ABS for injection moulding with enhanced heat resistance. Novodur HH-112 2700 111 5.5 11 58 MORE INFO > Novodur® HH-112 is a high heat injection molding grade. It provides extraordinary heat resistance combined with enhanced stiffness. Novodur MH-102 2800 103 6 17 53 MORE INFO > Novodur® MH-102 is a medium heat, medium stiffness injection molding grade. It provides an excellent balance of physical and mechanical properties. Novodur Ultra 4000PG 2400 107 7 23 46 MORE INFO > Novodur® Ultra 4000PG is an injection molding grade especially suitable for electroplating, providing enhanced heat resistance. Novodur Ultra 4105 2000 107 9 40 45 MORE INFO > Novodur® Ultra 4105 is a PC modified high heat injection molding grade with very high impact strength. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs. Novodur Ultra 4140PG 2100 106 9 41 46 MORE INFO > Novodur® Ultra 4140PG is a PC modified plating grade combining high heat resistance and excellent impact strength with the unique surface properties of a Novodur® ABS material. Novodur Ultra 4255 2100 110 (N/A) 55 47 MORE INFO > Novodur Ultra 4255 combines very high impact strength at room as well as at low temperature, 100 % ductility at -30 °C, high heat resistance and a best in class flowability. Furthermore, it is of low emission, i.e. suitable to produce parts which fulfill interior emission requirements of the automotive OEMs. -
MaterialABSBrandTerluran®BusinessINEOS StyrolutionGrades
GRADE TENSILE
MODULUS
(MPa)VICAT
SOFTENING
VST/B/50 (50°C/h, 50N)
(°C)MELT
VOLUME
RATE
220°C/10kg
(cm³/10 min)CHARPY
NOTCHED
IMPACT
STRENGTH
23°C
(MPa)TENSILE
STRESS
@ YIELD
23°C
(MPa)MORE INFO TYPICAL APPLICATIONS Terluran EHI-7 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Terluran® EHI-7 is a medium flow, high impact extrusion grade with super high gloss and superior surface aesthetics. Styrolution’s Terluran® EHI-7 is intended for mono or multilayer sheet making it a perfect fit as a substrate for our weatherable Luran® S ASA. Terluran GP-22 2300 96 19 22 45 MORE INFO > Terluran® GP-22 is an easy-flow, general purpose injection molding grade with high resistance to impact and heat distortion; intended for a wide range of applications, particularly in the housings sector. Terluran GP-35 2300 95 34 19 44 MORE INFO > Terluran® GP-35 is high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio. Terluran GP-35 White 2300 95 34 19 44 MORE INFO > Terluran® GP-35 White is a new version of Terluran GP-35 containing a primary package of white pigments and UV stabilization. Just as GP-35 this new grade is suitable for self-coloring with the additional benefit to already contain a primary white and UV formulation and thus the product can create significant savings of master batch consumption in light colors. Terluran GP-35 White is a high-flow, general purpose injection molding grade with good ductility, intended for moldings with thin walls and/or adverse flow length to wall ratio. Terluran HI-10 1900 90 5.5 35 38 MORE INFO > Terluran® HI-10 is an medium flow, injection molding grade with very high resistance to impact with excellent heat distortion and suitable for injection molding and extrusion. Terluran KR2910 (N/A) (N/A) (N/A) (N/A) (N/A) MORE INFO > Terluran KR 2910 acrylonitrile/butadiene/styrene copolymer (ABS) is a general purpose, extrusion grade resin with good impact resistance and processing characteristics. Terluran KR 2910 is intended for use as a substrate layer in co-extrusion and profile extrusion applications. Terluran SP-6 1900 90 5.5 35 38 MORE INFO > Terluran® SP-6 is a high impact extrusion grade.