Product Finder
INEOS products make a significant contribution to saving life, improving health and enhancing standards of living for people around the world. Our businesses produce the raw materials that are essential in the manufacture of a wide variety of goods, ranging from automotive parts to medical applications, mobile phones to construction.
Showing 115 Results
INEOS O & P USA
-
MaterialPEBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS A4040 4.1 MI2
(190°C/2.16kg)0.9470 TDS SDS RPS CONTACT > Silane process crosslinkable pipe grade A60-70-162 0.72 MI2
(190°C/2.16kg)0.9630 TDS SDS RPS CONTACT > Resin designed for use in dairy, juice, and water bottles B50-35H-176 0.35 MI2
(190°C/2.16kg)0.9500 TDS SDS RPS CONTACT > Household chemical, others requiring good impact, ESCR, antistat B53-35H-011 0.35 MI2
(190°C/2.16kg)0.9550 TDS SDS RPS CONTACT > Household chemical, personal care; good top-load/impact balance B54-25H-127 0.35 MI2
(190°C/2.16kg)0.9550 TDS SDS RPS CONTACT > Household chemical, personal care; good top-load/impact balance, antistat CAP311US 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties CAP311US1 3.8 g/10 min (190░C/2.16kg) 0.9600 <1 TDS RPS CONTACT > Application requiring excellent processability, high rigidity, enhanced stress cracking resistance, and excellent organoleptic properties. CAP311US2 3.8 MI2
(190°C/2.16kg)0.9600 <1 TDS SDS RPS CONTACT > Applications requiring excellent processability, high rigidity, enhanced stress cracking resistance and excellent organoleptic properties CAP508US 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > certified as low taste and is intended for packaging in direct contact with beverages CAP508US1 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > Certified as low taste and is intended for packaging in direct contact with beverages CAP508US2 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > certified as low taste and is intended for packaging in direct contact with beverages CAP508US3 1.7 MI2
(190°C/2.16kg)0.9530 2.2 TDS SDS RPS CONTACT > certified as low taste and is intended for packaging in direct contact with beverages CP53-30 0.35 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > Corrugated pipe grade G50-100 10.0 HLMI
(190°C/21.6kg)0.9500 TDS SDS RPS CONTACT > Copolymer with excellent ESCR and impact, for large part blow molding HP53-25-155 0.22 MI2
(190°C/2.16kg)0.9520 TDS SDS RPS CONTACT > High ESCR for automotive such as HVAC and under-hood reservoirs J50-1000-178 11.0 MI2
(190°C/2.16 kg)0.9510 TDS SDS RPS CONTACT > Organoleptic certifiedcopolymer for beverage closures J50-1000-181 11.0 MI2
(190°C/2.16kg)0.9510 TDS SDS RPS CONTACT > Lubricated version of J50-1000-178 J50-1000-187 11.0 MI2
(190°C/2.16kg)0.9510 TDS SDS RPS CONTACT > Lubricated version of J50-1000-178 J50-2000-119 20.0 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > High flow copolymer for Caps & Closures applications J50-200-178 2.0 MI2
(190°C/2.16kg)0.9520 TDS SDS RPS CONTACT > Organoleptic certifiedcopolymer for carbonated soft drink closures J52-08-226 9.0 HLMI
(190°C/21.6kg)0.9510 TDS SDS RPS CONTACT > copolymer for thin gauge blown film applications where good processability, high stiffness and excellent strength are required J60-1700-173 16.0 MI2
(190°C/2.16kg)0.9610 TDS SDS RPS CONTACT > High flow homopolymer designed for specialty compounding J60-800-178 8.0 MI2
(190°C/2.16kg)0.9610 TDS SDS RPS CONTACT > Organoleptic certified homopolymer for beverage closures K38-20-160 0.2 MI2
(190°C/2.16kg)0.9430 TDS SDS RPS CONTACT > Precompounded yellow version of K38-20-138 K38-20-188 0.2 MI2
(190°C/2.16kg)0.9400 TDS SDS RPS CONTACT > UV stabilized version of K38-20-138 K44-11-128 12.0 HLMI
(190°C/21.6kg)0.9470 TDS SDS RPS CONTACT > High molecular weight, excellent ESCR and impact for large parts K44-15-122 12.5 HLMI
(190°C/21.6kg)0.9440 TDS SDS RPS CONTACT > Natural, PE3608 listed small diameter water, sewer and industrial pipe grade K44-24-122 30.0 HLMI
(190°C/21.6kg)0.9440 TDS SDS RPS CONTACT > Pipe coating grade K46-06-185 4.2 HLMI
(190°C/21.6kg)0.9460 TDS SDS RPS CONTACT > High molecular weight resin for fuel tanks and other large parts T50-1000-178 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding T50-1000-181 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding for applications requiring lubrication. T50-1000-187 11.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > General purpose injection molding for applications requiring lubrication. T50-2000-119 20.0 MI2
(190°/2.16 kg0.9530 TDS SDS RPS CONTACT > General purpose injection molding T50-200-178 2.0 MI2
(190°/2.16 kg)0.9510 TDS SDS RPS CONTACT > Injection molding applications which require high impact resistance and good environmental stress crack resistance T50-500-171 6.5 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > General purpose injection molding grade T50-500-196 6.5 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > General purpose injection molding grade; suitable for use as a pail resin T50-800-01 8.0 MI2
(190°C/2.16kg)0.9530 TDS SDS RPS CONTACT > General purpose injection molding and consumer products T60-1200-119 12.0 MI2
(190°C/2.16 Kg)0.9600 TDS SDS RPS CONTACT > T60-800-119 8.0 MI2
(190°/2.16 kg)0.9610 TDS SDS RPS CONTACT > High stiffness grade for materials handling TC46-25 0.3 MI2
(190°C/2.16kg)0.9480 TDS SDS RPS CONTACT > Telecommunications conduit grade TUB121B 8.5 HLMI
(190°C/21.6kg)0.9590 TDS SDS RPS CONTACT > Precompounded black, bimodal copolymer grade suitable for large diameter water, industrial, natural gas and mining pipe. TUB121GN 8.5 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal coplymer grade suitable for large diameter water, natural gas and mining pipe. TUB121N 8.5 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal coplymer grade suitable for large diameter water, natural gas and mining pipe. TUB121NTW 8.0 HLMI
(190°C/21.6kg)0.9490 TDS SDS RPS CONTACT > Natural bimodal copolymer designed for large diameter, thick wall piping for potable water, industrial and mining applications. -
MaterialPPBrandBusinessINEOS O & P USAGrades
GRADE MFR
(g/10 min)DENSITY
(g/cm³)NOTCHED IZOD IMPACT
(ft-lb/in)TECH
DATA
SHEETSDS REGULATORY
POSITION
STATEMENTCONTACT TYPICAL APPLICATIONS 3950 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > High flow impact copolymer for automotive interiors H00G-00 0.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High stiffness grade for containers such as auto under-hood reservoirs H01H-00 1.7
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer grade for thermoformed sheet H02C-00 2.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High clarity, nucleated homopolymer grade for thermoformed packaging H02C-01 2.3
(230°C/2.16kg)1 TDS SDS RPS CONTACT > Low plate-out, high clarity, nucleated homopolymer grade for thermoforming H02C-04 2.3
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Thermoforming grade with new nucleator technology providing enhanced clarity H02G-02 2.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for BOPP, tape, twine, woven bag andthermoformed sheet H03G-06 3.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer designed for BOPP applications H03W-00 3.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose low water carry-over homopolymer grade H03W-01 3.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Low water carry-overhomopolymer for cordage, carpet backing, industrial fabrics, and geotextiles H03W-02 3.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Low water carryover general purpose homopolymer extrusion grade H04W-01 4.2
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for extrusion processing in applications that require low water carry-over. H05A-01 5.1
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Consumer products, housewares, medical packaging and rigid packaging. H05H-01 5.6
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances and automotive H07N-00 7.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Barefoot homopolymer with nucleation designed for extrusion processing H08U-00 8.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for fiber spinning applications requiring UV protection. H12E-00 12.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer grade with high antistat level for closure applications H12G-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer and closure applications H12G-01 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose homopolymer suitable for extrusion and injection molding. Uses include extruded sheet, BOPP film, housewares, rigid packaging, caps and closures H12Z-00 12.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer & closure applications H12Z-02 12.8
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for closure applications H12Z-03 12.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer designed for optimal processing and surface appearance in injection molding applications H13M-00 13.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Medium-term heat aging homopolymer for packaging, closures & consumer products H14A-00 14.3
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated homopolymer for packaging, closures & consumer products H17U-00 17.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > Designed for carpet fiber applications. H19G-01 19.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > General purpose fiber grade homopolymer H20A-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grade with moderate levels of antistat H20E-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Injection molding grades with high level of antistat H20G-00 20.0
(230°C/2.16kg)TDS SDS RPS CONTACT > General purpose homopolymer for consumer, housewares, and rigid packaging H20H-00 20.5
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Long-term heat aging homopolymer for appliances, consumer, housewares, and rigid packaging H20Z-00 20.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated homopolymer for consumer and rigid packaging H28E-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer with high antistat levels for consumer, rigid packaging and closures applications H28G-00 28.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Controlled rheology polypropylene homopolymer designed for high tenacity yarn applications. H35G-02 35.0
(230°C/2.16kg)<1 TDS SDS RPS CONTACT > General purpose homopolymer for consumer. housewares, and rigid packaging H35Z-00 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated, nucleated, high flow homopolymer for rigid packaging and housewares H35Z-02 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > nucleated, antistated, high flow rate, homopolymer for housewares, medical components and thin-walled rigid packaging H38G-02 38.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Homopolymer for spunbonded nonwovens and partially oriented yarn (POY) H44N-00 47.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > High flow rate, nucleated polypropylene to improve isotropic shrinkage and prevent warpage H53N-00 53.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Nucleated high MFR homopolymer with lubricant for high speed injection molding applications, such as media and thin walled packaging and housewares L10G-00 10.0
(230°C/2.16kg)2.5 TDS SDS RPS CONTACT > General impact grade designed for injection molding applications L12N-00 12.0
(230°C/2.16kg)5.7 TDS SDS RPS CONTACT > High gloss, nucleated impact copolymer for automotive, consumer and housewares applications L12Z-00 12.0
(230°C/2.16kg)2.6 TDS SDS RPS CONTACT > Antistatted and nucleated impact copolymer for housewares, consumer products and toys L12Z-01 12.0
(230°C/2.16kg)3.4 TDS SDS RPS CONTACT > High gloss, nucleated and antistatted impact copolymer for automotive, toys, consumer and housewares applications L34N-00 34.0
(230°C/2.16kg)2.8 TDS SDS RPS CONTACT > Nucleated, low gloss impact copolymer for housewares and consumer products L70Z-01 70.0
(230°C/2.16kg)2.3 TDS SDS RPS CONTACT > Nucleated, antistated, high flow, medium impact impact coplymer for injection molding applications L90G-00 90.0
(230°C/2.16kg)0.9100 1.1 TDS SDS RPS CONTACT > High MFR impact copolymer for high speed injection molding and compounding. N00M-00 0.45
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N00N-00 0.35
(230°C/2.16kg)NB TDS SDS RPS CONTACT > High-impact impact copolymer designed for non-pressure structured wall pipe N01N-00 1.9
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for freezer-to-microwave thermoformed packaging N02G-00 2.5
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for high impact thermoformed packaging N05U-00 5.0
(230°C/2.16kg)7.4 TDS SDS RPS CONTACT > UV stabilized grade for materials handling N12N-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated grade with good stiffness/impact balance for compounding and injection molding applications. N12Z-00 12.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistated impact copolymer designed for injection molding applications. N12Z-01 14.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistatic polypropylene impact copolymer designed for injection molding applications. N20G-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Impact copolymer with good stiffness/impact balance for toys andconsumer products N20N-00 20.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Nucleated and antistattedimpact copolymer with good stiffness/impact balance for materials handling, toys and consumer products R01A-00 1.9
(230°C/2.16kg)1.6 TDS SDS RPS CONTACT > Balance of stiffness, impact, contact clarity; suitable for hot fill R01C-00 1.9
(230°C/2.16kg)5.6 TDS SDS RPS CONTACT > Clarified grade with balance of stiffness, impact; suitable for hot fill R01C-01 1.9
(230°C/2.16kg)6.4 TDS SDS RPS CONTACT > Clarified, low plate-out grade with balance of stiffness, impact; hot fill R02C-00 2.3 (230°C/2.16kg) 0.9030 0.8 TDS SDS RPS CONTACT > Sheet extrusion and thermoforming of clear food containers and lids. R08G-00 8.0 (230°/2.16kg) 0.9000 1.0 TDS SDS RPS CONTACT > Film, blow molding, expanded PP beads, injection molding R08S-00 8 .0
(230°C/2.16kg)1.4 TDS SDS RPS CONTACT > Random copolymer with slip agent R12C-01 12.0
(230°C/2.16kg)1.2 TDS SDS RPS CONTACT > Low antistat, clarified grade for injection stretch blow molding R35C-01 35.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Antistated version of R35C-00 R35C-02 35.0
(230°C/2.16kg)1.1 TDS SDS RPS CONTACT > Clarified and lubricated random copolymer for medium and thin wall molding applications giving a bluish hue of enhanced and distinctive clarity R35C-03 35.0
(230°C/2.16kg)0.9000 1.1 TDS SDS RPS CONTACT > Thin wall clear parts R55C-00 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Clarified and antistatic random copolymer for thin wall molding applications requiring very good mold filling capabilities, excellent clarity, fast cycle times and good stiffness-to-impact properties balance R55C-01 55.0
(230°C/2.16kg)< 1 TDS SDS RPS CONTACT > Lubricated and antistatic random copolymer designed for high-speed injection molding of medium to thin walled parts requiring excellent clarity, fast cycle times and ease of de-nesting T00G-00 0.6
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T00G-02 0.6
(230°C/2.16kg)NB TDS SDS RPS CONTACT > Special fractional melt flow rate impact copolymer designed for highly flexible, high impact, soft touch and certain FDA applications T10G-03 10.0
(230°C/2.16kg)NB TDS SDS RPS CONTACT > TPO designed for roofing, compounding and soft applications